Search results
Jump to navigation
Jump to search
Create the page "Connector" on this wiki! See also the search results found.
- ...'''. Toslink female surface connector pin 2 (Vcc) is tied with a pin of AV connector and both goes to a component labeled '''5A KC''' (transistor ?)1 KB (171 words) - 08:43, 20 July 2017
- {{PS3 PSU Control connector 5 pins}}192 bytes (24 words) - 02:39, 27 March 2021
- *2-pins connector, disc load/eject motor (load+, load-) *14-pins connector (switches are located at pins 4,5,6)964 bytes (137 words) - 22:47, 20 March 2022
- {{PS3 PSU Control connector 4 pins}}282 bytes (43 words) - 17:01, 27 March 2021
- ** IC3802 LOW (main componentside with SATA connector, [[CELL BE]], [[RSX]] etc. next to [[Starship2]]) ** IC3803 HIGH (backside next to 60-pin BD ATA connector)3 KB (469 words) - 07:13, 17 April 2023
- {{PS3 PSU Control connector 4 pins}}347 bytes (46 words) - 02:50, 27 March 2021
- Has a 45-pin connector for the laser flat flex cable and thus needs the [[KEM-850]] drive. File:Superslim missing component close to SB.jpg|eMMC solder pads and service connector1 KB (169 words) - 17:40, 7 February 2023
- File:SURTEES-03 8.jpg|Populated Communication Processor Connector File:SURTEES-03 9.jpg|Populated Syscon Service Connector1 KB (187 words) - 13:39, 19 May 2024
- RS_SPDO_33 goes to layerhole to R2412 and goes directly to IC2409 (TOSLINK connector) RS_SPDO_33 goes to layerhole to R2412 and goes directly to IC2409 (TOSLINK connector)2 KB (250 words) - 08:38, 20 July 2017
- {{PS3 PSU Control connector 5 pins}}350 bytes (49 words) - 02:35, 27 March 2021
- * CRTC -> Encoder -> Connector * It seems that head A is connected to HDMI connector.2 KB (325 words) - 03:05, 3 February 2014
- {{PS3 PSU Control connector 5 pins}}395 bytes (63 words) - 02:37, 27 March 2021
- * MECHA_INT (pad E2) Connected to BluRay Drive connector (CN3221) pin 46 * MC_DET (pad E4) Connected to MultiCard Reader connector (CN3219) pin 142 KB (244 words) - 02:42, 18 October 2022
- {{PS3 PSU Control connector 5 pins}}441 bytes (71 words) - 23:45, 27 January 2022
- {{PS3 PSU Control connector 4 pins}}473 bytes (74 words) - 02:46, 27 March 2021
- {{PS3 PSU Control connector 3 pins}}414 bytes (65 words) - 02:40, 27 March 2021
- {{PS3 PSU Control connector 4 pins}}485 bytes (77 words) - 02:37, 9 September 2021
- {{PS3 PSU Control connector 5 pins}}466 bytes (76 words) - 02:39, 27 March 2021
- ...tor and DC switch IC to southbridge v2.jpg|[[JSD-001]]/[[JTP-001]] [[USB]] connector [[Protection|TH3301 thermistor]] and DC switch IC to [[South Bridge]] ...ed in:<br/>• "A" connector (host): connected to the signal ground<br>• "B" connector (device): not connected3 KB (387 words) - 06:16, 1 July 2023
- ...ile:BD-460 laser pickup connector.jpg|200px|thumb|left|BD-460 laser pickup connector]]</div>569 bytes (83 words) - 21:36, 13 June 2015
- {{PS3 PSU Control connector 3 pins}}394 bytes (53 words) - 02:41, 27 March 2021
- * Motherboard connector CN101443 bytes (56 words) - 03:28, 31 December 2014
- ....com/ps3/index.php?search=connector&fulltext=Search&title=Special%3ASearch Connector] ||3 KB (406 words) - 13:57, 22 November 2021
- {{PS3 PSU Control connector 4 pins}}520 bytes (83 words) - 02:49, 27 March 2021
- {{PS3 PSU Control connector 4 pins}}572 bytes (82 words) - 13:05, 15 April 2024
- {{PS3 PSU Control connector 4 pins}}533 bytes (85 words) - 02:45, 27 March 2021
- Unlike PPX-001, this board has a 45-pin connector for the laser flat flex cable, just like earlier super slim motherboards di713 bytes (106 words) - 16:54, 10 February 2023
- {{PS3 PSU Control connector 4 pins}}519 bytes (74 words) - 02:43, 27 March 2021
- {{PS3 PSU Control connector 4 pins}}531 bytes (87 words) - 02:44, 27 March 2021
- Unlike earlier super slim boards and [[PQX-001]], this board has a 40-pin connector for the laser flat flex cable.759 bytes (112 words) - 09:20, 10 February 2023
- Has a 45-pin connector for the laser flat flex cable and thus needs the [[KEM-850]] drive.900 bytes (124 words) - 17:41, 7 February 2023
- {{PS3 PSU Control connector 4 pins}}849 bytes (146 words) - 02:48, 27 March 2021
- ! Used on !! Type of Connector | [[MPU-501]] ([[CEB-2040]]) || CN6504: Headerpins<br />CN6507: ZIF Connector21 KB (2,729 words) - 06:05, 1 July 2023
- The [[TMR-520]] board connects the [[TCP-520]] board to the [[PCI]] connector of the PS3 motherboard. Cytology uses 160 pins, Cookie uses 70 or 80 pins b727 bytes (104 words) - 16:52, 22 April 2021
- ...that can send signals to the [[Move Motion Controller]] using a "special" connector. *"move controller" mini connector (8 pins)3 KB (393 words) - 12:44, 14 November 2023
- {{PS3 PSU Control connector 5 pins}}724 bytes (116 words) - 02:38, 27 March 2021
- {{PS3 PSU Control connector 3 pins}}1 KB (170 words) - 02:42, 27 March 2021
- ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 4 (Cb/Pb/Blue) through 750ohm resistor ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 1 (Y/Green) through 750ohm resistor15 KB (1,981 words) - 19:11, 21 March 2023
- {{PS3 PSU Control connector 5 pins}}1 KB (162 words) - 02:36, 27 March 2021
- Has a 45-pin connector for the laser flat flex cable and thus needs the [[KEM-850]] drive.1 KB (157 words) - 17:41, 7 February 2023
- == Connector, Square type 12P == Used as [[MultiAV]] connector <br />12 KB (1,842 words) - 04:30, 13 October 2022
- ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 4 (Cb/Pb/Blue) through 750ohm resistor ? ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 1 (Y/Green) through 750ohm resistor ?11 KB (1,527 words) - 07:52, 19 October 2022
- *2-pin connector1 KB (162 words) - 22:47, 20 March 2022
- *[[CN301 60p]] (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]1 KB (180 words) - 20:42, 9 May 2014
- * 24p (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]1 KB (193 words) - 01:30, 15 September 2017
- *[[CN301 60p]] (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]1 KB (183 words) - 20:13, 14 September 2018
- Has a 40-pin connector for the laser flat flex cable, just like [[RTX-001]] and [[PPX-001]].1 KB (197 words) - 16:51, 10 February 2023
- ...ower switch from the Fat models has been completely removed, and the mains connector changed from the three pin IEC 60320 C14 to the two pin IEC 60320 C8. The c1 KB (172 words) - 15:32, 30 October 2023
- {{PS3 PSU Control connector 4 pins}}1 KB (208 words) - 02:46, 27 March 2021
- * 24p (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]1 KB (190 words) - 01:29, 10 May 2014
- Has a 40-pin connector for the laser flat flex cable, just like [[REX-001]] and [[PPX-001]].1 KB (205 words) - 16:51, 10 February 2023
- *[[CN301 60p]] (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]1 KB (199 words) - 20:11, 14 September 2018
- *[[CN301 60p]] (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]1 KB (209 words) - 20:11, 14 September 2018
- Slaveboard/Adaptorboard connector, 50 pins2 KB (225 words) - 14:10, 25 May 2015
- ...P-001 or JSD-001, SYSCON SW-x series, Switch board HSW-001, and 4 pins PSU connector (CN101) for PSU models APS-270 or EADP-200DB ...transistor, the transistor is activated by a volts signal from PIN1 of the connector, but the motherboard doesnt send this signal, see {{discussion}}13 KB (2,279 words) - 03:57, 20 July 2017
- ...smitter-HDMIconnector.png|200px|thumb|left|RSX to HDMI-transmitter to HDMI connector diagram]]</div>2 KB (275 words) - 15:26, 26 May 2021
- ...(MultiAV) - pin3 DCout of the [[MultiAV]] [[Connectors#AV Multi Out|output connector]] and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDT ...MI) - pin18 +5V of the [[HDMI]] [[Connectors#Audio/Video connectors|output connector]] and is feeded by +5V_ANA via R2553 0 Ohm.12 KB (2,087 words) - 18:42, 5 February 2014
- ...200px|thumb|left|PCIe x4 connector above the Communication Processor (PCI) connector on a TMU-520]]</div>7 KB (652 words) - 17:53, 13 July 2021
- *[[CN301 60p]] (Bluraydrive I/O Connector) -> to [[Motherboard_Revisions|Motherboard]]2 KB (257 words) - 20:10, 14 September 2018
- ...PS3 uses several types of common/standard connectors, with one proprietary connector for backwards compatibility (MultiAV). ...lt=Type A receptacle HDMI]]<br />[[File:PS3 HDMI pinout.jpg|200px|alt=HDMI Connector Pinout + motherboard padlayout]]<br />[[File:HDMI pads as seen on JTP-001 -13 KB (1,761 words) - 13:14, 11 March 2024
- ...-MultiAVconnector.png|200px|thumb|left|RSX to MultiAV DA/driver to MultiAV connector diagram]]</div>3 KB (414 words) - 01:17, 18 July 2017
- ...OM]] (only in [[Mullion]]) data bus in between syscon EEPROM and a service connector3 KB (392 words) - 14:07, 29 May 2023
- === Internal tray with eSATA connector ===10 KB (1,632 words) - 07:14, 17 April 2023
- ...0px|thumb|left|Communication Processor (PCI) connector beneath the PCIe x4 connector on a TMU-520]]</div> ...ight">[[File:PCI connector JSD-001 SB and SC UART.jpg|200px|thumb|left|PCI connector JSD-001 SB and SC UART]]</div>10 KB (975 words) - 20:56, 16 September 2021
- Slaveboard/Adaptorboard connector, 50 pins3 KB (439 words) - 14:10, 25 May 2015
- ...CHB is missing the circuitry for the Wifi indicator light, the card reader connector, and some circuitry that may be related to Wifi functions where the Wifi/BT3 KB (461 words) - 13:29, 19 May 2024
- mounted between SATA/PATA connector and [[Bluray Drive ]] thus emulating drive, using [[Storage_Manager#0x5004_5 KB (809 words) - 14:25, 2 November 2021
- ...O || {{yes}} || PE10 || {{no}} || TIM1_CH2N || || || || EXT_3 || || || EXT connector Pin 3 ...|| {{no}} || TIM1_CH2 || || PPM <br /> telemetry || || EXT_4 || || || EXT connector Pin 433 KB (4,555 words) - 02:22, 7 May 2023
- ...nt with a "AV MultiOUT" cable, and then to the cabinet display using a VGA connector **1 connector (in white) with 24 pins20 KB (3,040 words) - 19:17, 4 September 2023
- Port 2 (usuable as MDI 4 dif.pair) : wired to external UTP connector6 KB (895 words) - 15:17, 5 February 2014
- | 1 || VIN || Connected to PSU connector '''+5V_EVER'''8 KB (1,123 words) - 03:18, 13 October 2022
- ...r || Control <abbr title="connector">Conn.</abbr> || 12V Rail <abbr title="connector">Conn.</abbr> || Input (AC) || colspan="2" | Output (DC) || Cumulative || E ...mber of pins on the power supply. It must match the number of pins on your connector cable. <span style="color:#FF0000;">The second is to try to find the highes18 KB (2,723 words) - 06:37, 16 February 2024
- **'''PCB + USB connector thick''' - 5.7 milimeter **'''PCB + USB connector + regulator thick''' - 7.2 milimeter42 KB (6,628 words) - 17:16, 16 September 2021
- ...R<br />As seen on PS3 Slim PCB<br />righthand side goes to backside RJ/UTP connector]]<br />[[File:64-pin-QFN-Marvel-Alaska-88E1118R.PNG|200px|thumb|left|64-pin9 KB (1,356 words) - 15:10, 5 February 2014
- ...odel]] !! [[Motherboard_Revisions|Motherboard]] !! Model !! Part number !! Connector !! Power !! Eject !! Standby/PowerOn/<abbr title="Yellow color is made by l13 KB (1,858 words) - 19:27, 5 December 2021
- === CN301 - Bluraydrive Main I/O Connector === <div style="float:right">[[File:60pin-DB-CON.jpg|200px|thumb|left|60-pin DB Connector<br />bluray drive]]</div>32 KB (4,399 words) - 17:47, 14 December 2023
- File:E3 - Panasonic PCB connector 50pin.jpg| E3 - Panasonic PCB connector 50pin42 KB (5,000 words) - 06:16, 1 July 2023
- *Pressure connector for the buttons membrane ...in 1 (AC) and pin 2 (USB). But the playstation 3 controllers doesnt have a connector for an AC adapter aaauch... This is the reason why the V_USB rail of the ci107 KB (16,356 words) - 17:00, 14 May 2024
- ** IC3802 LOW (<abbr title="main componentside with SATA connector, CELL BE, RSX etc">main componentside</abbr> next to [[Starship2]]) ** IC3803 HIGH (backside next to 60-pin BD ATA connector)58 KB (8,246 words) - 06:18, 1 July 2023
- ...MHz oscillator (for the CPU), and a 5pin reset generator (on the cart edge connector, the supply pins are slightly longer than the data signal pins, so when ins19 KB (2,720 words) - 15:04, 19 November 2023
- | 4 = HDMI and Component, 5 = RGB (SCART and VGA), 6 = YPbPr (SCART connector)40 KB (5,239 words) - 20:09, 25 September 2021
- ...] [[CECHBxx]] [[CECHCxx]] [[CECHExx]]). Located in between SB and the SATA connector. Configured as "local"<br />55 KB (7,617 words) - 07:11, 17 April 2023
- ...tors, and ICs on the 12v line. Measure resistance of the large 2 prong 12v connector on the motherboard. It should read in the Kilo ohms range if there is suffi59 KB (9,336 words) - 06:31, 20 May 2024