Search results

Jump to navigation Jump to search
  • ...'''. Toslink female surface connector pin 2 (Vcc) is tied with a pin of AV connector and both goes to a component labeled '''5A KC''' (transistor ?)
    1 KB (171 words) - 08:43, 20 July 2017
  • {{PS3 PSU Control connector 5 pins}}
    192 bytes (24 words) - 02:39, 27 March 2021
  • *2-pins connector, disc load/eject motor (load+, load-) *14-pins connector (switches are located at pins 4,5,6)
    964 bytes (137 words) - 22:47, 20 March 2022
  • {{PS3 PSU Control connector 4 pins}}
    282 bytes (43 words) - 17:01, 27 March 2021
  • ** IC3802 LOW (main componentside with SATA connector, [[CELL BE]], [[RSX]] etc. next to [[Starship2]]) ** IC3803 HIGH (backside next to 60-pin BD ATA connector)
    3 KB (469 words) - 07:13, 17 April 2023
  • {{PS3 PSU Control connector 4 pins}}
    347 bytes (46 words) - 02:50, 27 March 2021
  • File:SURTEES-03 8.jpg|Populated Communication Processor Connector File:SURTEES-03 9.jpg|Populated Syscon Service Connector
    1 KB (187 words) - 16:45, 21 March 2023
  • Has a 45-pin connector for the laser flat flex cable and thus needs the [[KEM-850]] drive. File:Superslim missing component close to SB.jpg|eMMC solder pads and service connector
    1 KB (169 words) - 17:40, 7 February 2023
  • RS_SPDO_33 goes to layerhole to R2412 and goes directly to IC2409 (TOSLINK connector) RS_SPDO_33 goes to layerhole to R2412 and goes directly to IC2409 (TOSLINK connector)
    2 KB (250 words) - 08:38, 20 July 2017
  • {{PS3 PSU Control connector 5 pins}}
    350 bytes (49 words) - 02:35, 27 March 2021
  • * CRTC -> Encoder -> Connector * It seems that head A is connected to HDMI connector.
    2 KB (325 words) - 03:05, 3 February 2014
  • {{PS3 PSU Control connector 5 pins}}
    395 bytes (63 words) - 02:37, 27 March 2021
  • * MECHA_INT (pad E2) Connected to BluRay Drive connector (CN3221) pin 46 * MC_DET (pad E4) Connected to MultiCard Reader connector (CN3219) pin 14
    2 KB (244 words) - 02:42, 18 October 2022
  • {{PS3 PSU Control connector 5 pins}}
    441 bytes (71 words) - 23:45, 27 January 2022
  • {{PS3 PSU Control connector 4 pins}}
    473 bytes (74 words) - 02:46, 27 March 2021
  • {{PS3 PSU Control connector 3 pins}}
    414 bytes (65 words) - 02:40, 27 March 2021
  • {{PS3 PSU Control connector 4 pins}}
    485 bytes (77 words) - 02:37, 9 September 2021
  • {{PS3 PSU Control connector 5 pins}}
    466 bytes (76 words) - 02:39, 27 March 2021
  • ...tor and DC switch IC to southbridge v2.jpg|[[JSD-001]]/[[JTP-001]] [[USB]] connector [[Protection|TH3301 thermistor]] and DC switch IC to [[South Bridge]] ...ed in:<br/>• "A" connector (host): connected to the signal ground<br>• "B" connector (device): not connected
    3 KB (387 words) - 06:16, 1 July 2023
  • ...ile:BD-460 laser pickup connector.jpg|200px|thumb|left|BD-460 laser pickup connector]]</div>
    569 bytes (83 words) - 21:36, 13 June 2015
  • {{PS3 PSU Control connector 3 pins}}
    394 bytes (53 words) - 02:41, 27 March 2021
  • * Motherboard connector CN101
    443 bytes (56 words) - 03:28, 31 December 2014
  • ....com/ps3/index.php?search=connector&fulltext=Search&title=Special%3ASearch Connector] ||
    3 KB (406 words) - 13:57, 22 November 2021
  • {{PS3 PSU Control connector 4 pins}}
    520 bytes (83 words) - 02:49, 27 March 2021
  • {{PS3 PSU Control connector 4 pins}}
    572 bytes (82 words) - 13:05, 15 April 2024
  • {{PS3 PSU Control connector 4 pins}}
    533 bytes (85 words) - 02:45, 27 March 2021
  • Unlike PPX-001, this board has a 45-pin connector for the laser flat flex cable, just like earlier super slim motherboards di
    713 bytes (106 words) - 16:54, 10 February 2023
  • {{PS3 PSU Control connector 4 pins}}
    519 bytes (74 words) - 02:43, 27 March 2021
  • {{PS3 PSU Control connector 4 pins}}
    531 bytes (87 words) - 02:44, 27 March 2021
  • Unlike earlier super slim boards and [[PQX-001]], this board has a 40-pin connector for the laser flat flex cable.
    759 bytes (112 words) - 09:20, 10 February 2023
  • Has a 45-pin connector for the laser flat flex cable and thus needs the [[KEM-850]] drive.
    900 bytes (124 words) - 17:41, 7 February 2023
  • {{PS3 PSU Control connector 4 pins}}
    849 bytes (146 words) - 02:48, 27 March 2021
  • ! Used on !! Type of Connector | [[MPU-501]] ([[CEB-2040]]) || CN6504: Headerpins<br />CN6507: ZIF Connector
    21 KB (2,729 words) - 06:05, 1 July 2023
  • The [[TMR-520]] board connects the [[TCP-520]] board to the [[PCI]] connector of the PS3 motherboard. Cytology uses 160 pins, Cookie uses 70 or 80 pins b
    727 bytes (104 words) - 16:52, 22 April 2021
  • ...that can send signals to the [[Move Motion Controller]] using a "special" connector. *"move controller" mini connector (8 pins)
    3 KB (393 words) - 12:44, 14 November 2023
  • {{PS3 PSU Control connector 5 pins}}
    724 bytes (116 words) - 02:38, 27 March 2021
  • {{PS3 PSU Control connector 3 pins}}
    1 KB (170 words) - 02:42, 27 March 2021
  • ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 4 (Cb/Pb/Blue) through 750ohm resistor ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 1 (Y/Green) through 750ohm resistor
    15 KB (1,981 words) - 19:11, 21 March 2023
  • {{PS3 PSU Control connector 5 pins}}
    1 KB (162 words) - 02:36, 27 March 2021
  • Has a 45-pin connector for the laser flat flex cable and thus needs the [[KEM-850]] drive.
    1 KB (157 words) - 17:41, 7 February 2023
  • == Connector, Square type 12P == Used as [[MultiAV]] connector <br />
    12 KB (1,842 words) - 04:30, 13 October 2022
  • ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 4 (Cb/Pb/Blue) through 750ohm resistor ? ...|| Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 1 (Y/Green) through 750ohm resistor ?
    11 KB (1,527 words) - 07:52, 19 October 2022
  • *2-pin connector
    1 KB (162 words) - 22:47, 20 March 2022
  • *[[CN301 60p]] (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    1 KB (180 words) - 20:42, 9 May 2014
  • * 24p (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    1 KB (193 words) - 01:30, 15 September 2017
  • *[[CN301 60p]] (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    1 KB (183 words) - 20:13, 14 September 2018
  • Has a 40-pin connector for the laser flat flex cable, just like [[RTX-001]] and [[PPX-001]].
    1 KB (197 words) - 16:51, 10 February 2023
  • ...ower switch from the Fat models has been completely removed, and the mains connector changed from the three pin IEC 60320 C14 to the two pin IEC 60320 C8. The c
    1 KB (172 words) - 15:32, 30 October 2023
  • {{PS3 PSU Control connector 4 pins}}
    1 KB (208 words) - 02:46, 27 March 2021
  • * 24p (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    1 KB (190 words) - 01:29, 10 May 2014
  • Has a 40-pin connector for the laser flat flex cable, just like [[REX-001]] and [[PPX-001]].
    1 KB (205 words) - 16:51, 10 February 2023
  • *[[CN301 60p]] (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    1 KB (199 words) - 20:11, 14 September 2018
  • *[[CN301 60p]] (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    1 KB (209 words) - 20:11, 14 September 2018
  • Slaveboard/Adaptorboard connector, 50 pins
    2 KB (225 words) - 14:10, 25 May 2015
  • ...P-001 or JSD-001, SYSCON SW-x series, Switch board HSW-001, and 4 pins PSU connector (CN101) for PSU models APS-270 or EADP-200DB ...transistor, the transistor is activated by a volts signal from PIN1 of the connector, but the motherboard doesnt send this signal, see {{discussion}}
    13 KB (2,279 words) - 03:57, 20 July 2017
  • ...smitter-HDMIconnector.png|200px|thumb|left|RSX to HDMI-transmitter to HDMI connector diagram]]</div>
    2 KB (275 words) - 15:26, 26 May 2021
  • ...(MultiAV) - pin3 DCout of the [[MultiAV]] [[Connectors#AV Multi Out|output connector]] and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDT ...MI) - pin18 +5V of the [[HDMI]] [[Connectors#Audio/Video connectors|output connector]] and is feeded by +5V_ANA via R2553 0 Ohm.
    12 KB (2,087 words) - 18:42, 5 February 2014
  • ...200px|thumb|left|PCIe x4 connector above the Communication Processor (PCI) connector on a TMU-520]]</div>
    7 KB (652 words) - 17:53, 13 July 2021
  • *[[CN301 60p]] (Bluraydrive I/O Connector) -&gt; to [[Motherboard_Revisions|Motherboard]]
    2 KB (257 words) - 20:10, 14 September 2018
  • ...PS3 uses several types of common/standard connectors, with one proprietary connector for backwards compatibility (MultiAV). ...lt=Type A receptacle HDMI]]<br />[[File:PS3 HDMI pinout.jpg|200px|alt=HDMI Connector Pinout + motherboard padlayout]]<br />[[File:HDMI pads as seen on JTP-001 -
    13 KB (1,761 words) - 13:14, 11 March 2024
  • ...-MultiAVconnector.png|200px|thumb|left|RSX to MultiAV DA/driver to MultiAV connector diagram]]</div>
    3 KB (414 words) - 01:17, 18 July 2017
  • ...OM]] (only in [[Mullion]]) data bus in between syscon EEPROM and a service connector
    3 KB (392 words) - 14:07, 29 May 2023
  • ...CHB is missing the circuitry for the Wifi indicator light, the card reader connector, and some circuitry that may be related to Wifi functions where the Wifi/BT
    3 KB (461 words) - 22:47, 5 April 2024
  • === Internal tray with eSATA connector ===
    10 KB (1,632 words) - 07:14, 17 April 2023
  • ...0px|thumb|left|Communication Processor (PCI) connector beneath the PCIe x4 connector on a TMU-520]]</div> ...ight">[[File:PCI connector JSD-001 SB and SC UART.jpg|200px|thumb|left|PCI connector JSD-001 SB and SC UART]]</div>
    10 KB (975 words) - 20:56, 16 September 2021
  • Slaveboard/Adaptorboard connector, 50 pins
    3 KB (439 words) - 14:10, 25 May 2015
  • mounted between SATA/PATA connector and [[Bluray Drive ]] thus emulating drive, using [[Storage_Manager#0x5004_
    5 KB (809 words) - 14:25, 2 November 2021
  • ...O || {{yes}} || PE10 || {{no}} || TIM1_CH2N || || || || EXT_3 || || || EXT connector Pin 3 ...|| {{no}} || TIM1_CH2 || || PPM <br /> telemetry || || EXT_4 || || || EXT connector Pin 4
    33 KB (4,555 words) - 02:22, 7 May 2023
  • ...nt with a "AV MultiOUT" cable, and then to the cabinet display using a VGA connector **1 connector (in white) with 24 pins
    20 KB (3,040 words) - 19:17, 4 September 2023
  • Port 2 (usuable as MDI 4 dif.pair) : wired to external UTP connector
    6 KB (895 words) - 15:17, 5 February 2014
  • | 1 || VIN || Connected to PSU connector '''+5V_EVER'''
    8 KB (1,123 words) - 03:18, 13 October 2022
  • ...r || Control <abbr title="connector">Conn.</abbr> || 12V Rail <abbr title="connector">Conn.</abbr> || Input (AC) || colspan="2" | Output (DC) || Cumulative || E ...mber of pins on the power supply. It must match the number of pins on your connector cable. <span style="color:#FF0000;">The second is to try to find the highes
    18 KB (2,723 words) - 06:37, 16 February 2024
  • **'''PCB + USB connector thick''' - 5.7 milimeter **'''PCB + USB connector + regulator thick''' - 7.2 milimeter
    42 KB (6,628 words) - 17:16, 16 September 2021
  • ...R<br />As seen on PS3 Slim PCB<br />righthand side goes to backside RJ/UTP connector]]<br />[[File:64-pin-QFN-Marvel-Alaska-88E1118R.PNG|200px|thumb|left|64-pin
    9 KB (1,356 words) - 15:10, 5 February 2014
  • ...odel]] !! [[Motherboard_Revisions|Motherboard]] !! Model !! Part number !! Connector !! Power !! Eject !! Standby/PowerOn/<abbr title="Yellow color is made by l
    13 KB (1,858 words) - 19:27, 5 December 2021
  • === CN301 - Bluraydrive Main I/O Connector === <div style="float:right">[[File:60pin-DB-CON.jpg|200px|thumb|left|60-pin DB Connector<br />bluray drive]]</div>
    32 KB (4,399 words) - 17:47, 14 December 2023
  • File:E3 - Panasonic PCB connector 50pin.jpg| E3 - Panasonic PCB connector 50pin
    42 KB (5,000 words) - 06:16, 1 July 2023
  • *Pressure connector for the buttons membrane ...in 1 (AC) and pin 2 (USB). But the playstation 3 controllers doesnt have a connector for an AC adapter aaauch... This is the reason why the V_USB rail of the ci
    107 KB (16,341 words) - 10:02, 17 January 2024
  • ** IC3802 LOW (<abbr title="main componentside with SATA connector, CELL BE, RSX etc">main componentside</abbr> next to [[Starship2]]) ** IC3803 HIGH (backside next to 60-pin BD ATA connector)
    58 KB (8,246 words) - 06:18, 1 July 2023
  • ...MHz oscillator (for the CPU), and a 5pin reset generator (on the cart edge connector, the supply pins are slightly longer than the data signal pins, so when ins
    19 KB (2,720 words) - 15:04, 19 November 2023
  • | 4 = HDMI and Component, 5 = RGB (SCART and VGA), 6 =&nbsp;YPbPr (SCART connector)
    40 KB (5,239 words) - 20:09, 25 September 2021
  • ...] [[CECHBxx]] [[CECHCxx]] [[CECHExx]]). Located in between SB and the SATA connector. Configured as "local"<br />
    55 KB (7,617 words) - 07:11, 17 April 2023
  • ...tors, and ICs on the 12v line. Measure resistance of the large 2 prong 12v connector on the motherboard. It should read in the Kilo ohms range if there is suffi
    59 KB (9,314 words) - 17:59, 1 May 2024