SW2-303
Jump to navigation
Jump to search
SW2-303 (SysCon)
First to be seen on PS3 Slim CECH-25xx with motherboards: JSD-00x/JTP-00x
Pinout
Pin # | Name | Port | Description | STBY Voltages |
---|---|---|---|---|
1 | 0 | |||
2 | ~1V @ standby (0 V?) | 0 | ||
3 | 3V @ standby (3.15V) | 3.15 | ||
4 | 0 | |||
5 | POW_LED | 0 | ||
6 | STBY_LED | 3v @ standby (3.3V) | 3.3 | |
7 | 0 | |||
8 | 0 | |||
9 | 0 | |||
10 | 0 | |||
11 | Connected to Backlit LEDs @SWITCH Board | 0 | ||
12 | Connected to CONTOUR LEDs @SWITCH Board | 0 | ||
13 | Connected to Pogo pin @SWITCH Board, seems its a service pin. | 0 | ||
14 | 0 | |||
15 | 0 | |||
16 | BUZZER | 0 | ||
17 | 0 | |||
18 | 3v @ standby | 3.0 | ||
19 | 0 | |||
20 | 0 | |||
21 | BACKUP_MODE? | 3v @ standby | 3.0 | |
22 | (Connected to Pin 7 @ Service Connector) (0V?) | 0 | ||
23 | 0 | |||
24 | THR_I2C_SDA | Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) | 3v @ standby (3.15) | |
25 | THR_I2C_SCL | Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) | 3v @ standby (3.15) | |
26 | Connected with standby voltage regulator, pin 3 | |||
27 | CLK -> 1-2V Amplitude (32.768Khz?) | |||
28 | CLK -> 1-2V Amplitude (32.768Khz?) | |||
29 | 1v @ standby (Connected to pin 8 at Service Connector) | 2.7 | ||
30 | 0.8v @ standby | 1.1 | ||
31 | 2.2v @ standby | 0.15 | ||
32 | 2.5 | |||
33 | GROUND | 0 | ||
34 | GROUND | 0 | ||
35 | 3v @ standby (3.3) | 3.3 | ||
36 | 3v @ standby (3.3) | 3.3 | ||
37 | 0.2v @ standby | 0 | ||
38 | 0.2v @ standby | 0 | ||
39 | 0 | |||
40 | 0 | |||
41 | AC IN? | 3v @ standby (3.3) | 3.3 | |
42 | 0 | |||
43 | DIAG_MODE? | 3v @ standby | 3.0 | |
44 | 0 | |||
45 | 0 | |||
46 | 0 | |||
47 | 3v @ standby (3.15) | 3.15 | ||
48 | 3v @ standby (3.15) | 3.15 | ||
49 | 0 | |||
50 | (Connected to pin 3 @ Service Connector) | 0 | ||
51 | 0 | |||
52 | 0 | |||
53 | 0 | |||
54 | 0 | |||
55 | 0 | |||
56 | GROUND | 0 | ||
57 | 3v @ standby (3.3) | 3.3 | ||
58 | 0 | |||
59 | 0 | |||
60 | 0 | |||
61 | 0 | |||
62 | 0 | |||
63 | 0 | |||
64 | 0 | |||
65 | 0 | |||
66 | 0 | |||
67 | 0 | |||
68 | 0 | |||
69 | 0 | |||
70 | 0 | |||
71 | 0 | |||
72 | 0 | |||
73 | 0 | |||
74 | 0 | |||
75 | 0 | |||
76 | 3v @ standby (3.15) | 3.15 | ||
77 | 3v @ standby (3.3) | 3.3 | ||
78 | SC_RxD | 0 | ||
79 | SC_TxD | 3v @ standby (3.3) | 3.3 | |
80 | 0 | |||
81 | 1v @ standby | 0 | ||
82 | 0 | |||
83 | 2v @ standby | 0 | ||
84 | 3v @ standby | 3.0 | ||
85 | 0 | |||
86 | 0 | |||
87 | 0 | |||
88 | 0 | |||
89 | 0 | |||
90 | 0 | |||
91 | 0 | |||
92 | 0 | |||
93 | 0 | |||
94 | 0 | |||
95 | 0 | |||
96 | 0 | |||
97 | 3v @ standby (3.3) | 3.3 | ||
98 | 0 | |||
99 | 0 | |||
100 | 3v @ standby (3.3) | 3.3 | ||
101 | GROUND | 0 | ||
102 | 0 | |||
103 | 0 | |||
104 | 0 | |||
105 | 0 | |||
106 | 0 | |||
107 | 0 | |||
108 | 0 | |||
109 | 3v @ standby | 3.0 | ||
110 | /POW_SW | 3v @ standby (3.3) | 3.3 | |
111 | /EJECT_SW | 3v @ standby (3.3) | 3.3 | |
112 | 0 | |||
113 | 0 | |||
114 | 0 | |||
115 | 0 | |||
116 | 0 | |||
117 | (0V?) | 0 | ||
118 | ACDC_STBY | 0 | ||
119 | 0 | |||
120 | 0 | |||
121 | 0 | |||
122 | 0 | |||
123 | 0 | |||
124 | 0 | |||
125 | 0 | |||
126 | FAN_PWM | PWM Control for the Fan. | 0 | |
127 | 0 | |||
128 | 0 |
This article is marked for rewrite/restructuring in proper wiki format. You can help PS3 Developer wiki by editing it. |
|