Template:CSW-001 pinout: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
| Line 19: | Line 19: | ||
| 7 || STBY_LED || [[Template:Syscon_pinout_BGA_200_pads|Syscon Mullion]], pad N7 || Red led || | | 7 || STBY_LED || [[Template:Syscon_pinout_BGA_200_pads|Syscon Mullion]], pad N7 || Red led || | ||
|- | |- | ||
| 8 || BD_LED || BluRay Connector, pin | | 8 || BD_LED || BluRay Connector (CN3221), pin 50 || Blue led || | ||
|- | |- | ||
| 9 || {{cellcolors|#333333|white}} GND || GND || GND || Ground | | 9 || {{cellcolors|#333333|white}} GND || GND || GND || Ground | ||
Revision as of 05:40, 18 October 2022
| Pin | Name | Connected to | Description | |
|---|---|---|---|---|
| On Motherboard | On Switch board | |||
| 1 | GND | GND | GND | Ground |
| 2 | SW_PWM | Syscon Mullion, pad N9 | Testpad ? | FREQ. Intended to send a PWM signal to the switch board ? |
| 3 | RMC_IN | Syscon Mullion, pad R10 Service Connector (CN4009) pin 17 |
Testpad ?. NC | IR Remote Control (input) |
| 4 | POW_SW | Syscon Mullion, pad B12 | Power Switch  |
|
| 5 | EJECT_SW | Syscon Mullion, pad A12 | Eject Switch  |
|
| 6 | POW_LED | Syscon Mullion, pad M7 | Green led | |
| 7 | STBY_LED | Syscon Mullion, pad N7 | Red led | |
| 8 | BD_LED | BluRay Connector (CN3221), pin 50 | Blue led | |
| 9 | GND | GND | GND | Ground |
| 10 | +5V_EVER | Power Supply Connector, pins 4/5 ? | VCC | 5V Standby |