Editing User talk:Ada L0ve Lace/sandbox

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
<div style="float:right">[[File:CXD90025G_-_pic05.jpg|200px|thumb|left|[[CXD90025G]] inside die overview]]</div>
=== Decap page/section===
to be moved


[[File:Ambox_deletion.png]] This article is for educational purposes only, do not try to repeat! [[File:Ambox_deletion.png]]
This article is for educational purposes only, do not try to repeat!
 
==== References ====
== References ==


*http://www.cl.cam.ac.uk/~sps32/mcu_lock.html Copy Protection in Modern Microcontrollers - '''Dr Sergei Skorobogatov'''
*http://www.cl.cam.ac.uk/~sps32/mcu_lock.html Copy Protection in Modern Microcontrollers - '''Dr Sergei Skorobogatov'''
Line 15: Line 15:
*http://travisgoodspeed.blogspot.fr/2009/06/cold-labless-hno3-decapping-procedure.html Cold, Labless HNO3 Decapping Procedure
*http://travisgoodspeed.blogspot.fr/2009/06/cold-labless-hno3-decapping-procedure.html Cold, Labless HNO3 Decapping Procedure


*http://www.cleanroom.byu.edu/wet_etch.phtml Wet Chemical Etching of Metals and Semiconductors
==== Decap a (epoxy packaged) chip, but why? ====
 
*http://users.sec.t-labs.tu-berlin.de/~nedos/ccs2013.pdf Breaking and Entering through the Silicon
 
== Decap a (epoxy packaged) chip, but why? ==
 
<div style="float:right">[[File:CXD90025G_EC120R3-3P0A_151217_diemrk2.jpg|200px|thumb|left|[[CXD90025G]] die numbers]]</div>
 


*to damage (beyond repair) the chip and things around you (including you) and end up ,if lucky, in the great [[Wall_of_Shame|Wall of Shame]] or much worst (dead, blind & anosmia ...)
*to damage (beyond repair) the chip and things around you (including you) and end up ,if lucky, in the great [[Wall_of_Shame|Wall of Shame]] or much worst (dead, blind & anosmia ...)
*for fun (then, use razorblade but not as you were going to tearing a part of the human scalp)
*for fun (then, use razorblade but not as you were going to tearing a part of the human scalp)
*photograph for forensics purposes:
*photograph for forensics purposes (with good magnificient if you didn t get blind during the process - to look for damage or to get die numbers.
**look for damage
*microprobing
**to get die numbers
*if somehow you end up here for making explosive things/dispose body, it s not the right place.
**check for counterfeit (e.g. http://www.cti-us.com/pdf/CCAP-101InspectExamplesA6.pdf)
*microprobing ( e.g.: with ion beam workstation)
*if somehow, you end up here for making explosive things/dispose body, it s not the right place.
 
== The Strike Easy Hard Way (be blind & anosmia) ==
 
Epoxy resin around the chip could be removed using fuming '''nitric acid''' (HNO<small>3</small>) (when the solution contains more than 86% HNO3, it is referred to as fuming nitric acid).  


Hot fuming nitric acid dissolves the package without affecting the chip. The procedure should preferably be carried out under very dry conditions, as the presence of water could corrode exposed aluminium interconnects.
==== The Strike Easy Hard Way (be blind & anosmia)====


Alternatives to heated HNO<small>3</small> (70% concentration is enough) can be with cold white HNO<small>3</small> (99% concentration), with '''sulfuric acid''' (H<small>2</small>SO<small>4</small>) or with (boilting) '''rosin''' (for 20 minutes).
Epoxy resin around the chip could be removed using fuming '''nitric acid''' (HNO<small>3</small>) (when the solution contains more than 86% HNO3, it is referred to as fuming nitric acid). Hot fuming nitric acid dissolves the package without affecting the chip. The procedure should preferably be carried out under very dry conditions, as the presence of water could corrode exposed aluminium interconnects. Alternatives to heated HNO<small>3</small> (70% concentration is enough) can be with cold white HNO<small>3</small> (99% concentration), with '''sulfuric acid''' (H<small>2</small>SO<small>4</small>) or with (boilting) '''rosin''' (for 20 minutes).


The chip is then washed with '''acetone''' in an '''ultrasonic bath''', followed optionally by a short bath in '''deionized water''' and '''isopropanol'''.  
The chip is then washed with '''acetone''' in an '''ultrasonic bath''', followed optionally by a short bath in '''deionized water''' and '''isopropanol'''. After that chip could be glued into a test package and bonded manually. Having enough experience it might be possible to remove epoxy without destroying bonding wires and smartcard contacts.
 
After that chip could be glued into a test package and bonded manually. Having enough experience it might be possible to remove epoxy without destroying bonding wires and smartcard contacts.


On the depackaged chip, the top-layer aluminium interconnect lines are still covered by a passivation layer (usually silicon oxide or nitride), which protects the chip from the environment and ion migration.  
On the depackaged chip, the top-layer aluminium interconnect lines are still covered by a passivation layer (usually silicon oxide or nitride), which protects the chip from the environment and ion migration.  


On top of this, we might also find a polyimide layer that was not entirely removed by HNO3 but which can be dissolved with '''ethylenediamine'''.  
On top of this, we might also find a polyimide layer that was not entirely removed by HNO3 but which can be dissolved with '''ethylenediamine'''. We have to remove the passivation layer (top layer of the die) before the probes can establish contact.
 
We have to remove the passivation layer (top layer of the die) before the probes can establish contact.


Wire bonding Gold is immune to attack from the fuming acids used to etch away the mold compound of the package; copper is not.
Wire bonding Gold is immune to attack from the fuming acids used to etch away the mold compound of the package; copper is not.


=== Passivation layer ===
===== Passivation layer =====


Growth of an oxide layer on the surface of a semiconductor to provide electrical stability by isolating the transistor surface from electrical and chemical conditions in the environment; this reduces reverse-current leakage, increases breakdown voltage, and raises power dissipation rating.
Growth of an oxide layer on the surface of a semiconductor to provide electrical stability by isolating the transistor surface from electrical and chemical conditions in the environment; this reduces reverse-current leakage, increases breakdown voltage, and raises power dissipation rating.
Line 63: Line 45:
An other way to remove the passivation layer is by using '''hydrofluoric acid'''.
An other way to remove the passivation layer is by using '''hydrofluoric acid'''.


== Terminology ==
==== Nitric acid ====
 
=== Nitric acid ===
*[[File:Ambox_deletion.png]]  Warning: [[File:Ambox_deletion.png]]
*[[File:Ambox_deletion.png]]  Warning: [[File:Ambox_deletion.png]]


  You can burn/intoxicate by fumes (like countless of experimented and certified chemists). Chemical burn traumata with nitric acid lead to  
  You can burn/intoxicate by fumes (like countless of experimented and certified chemists). Chemical burn traumata with nitric acid lead to  
  specific yellow- to brown-stained wounds with slower accumulation of eschar and slower demarcation compared with thermal burns; skins stains/coloration  
  specific yellow- to brown-stained wounds with slower accumulation of eschar and slower demarcation compared with thermal burns; skins stains/coloration can happens later
can happens later on (8 hours) without you noiticing any traumata/burn on the spot.
on (8 hours) without you noiticing any traumata/burn on the spot.


*Boiling point:83 °C (181 °F; 356 K) 68% solution boils at 121 °C (250 °F; 394 K)
*Boiling point:83 °C (181 °F; 356 K) 68% solution boils at 121 °C (250 °F; 394 K)
Line 77: Line 57:
*http://www.instructables.com/id/Make-Nitric-acid-The-Complete-Guide/
*http://www.instructables.com/id/Make-Nitric-acid-The-Complete-Guide/


=== Sulfuric acid ===
==== Sulfuric acid ====
*[[File:Ambox_deletion.png]]  Warning: [[File:Ambox_deletion.png]]
*[[File:Ambox_deletion.png]]  Warning: [[File:Ambox_deletion.png]]


Line 86: Line 66:
*http://chemistry.about.com/od/makechemicalsyourself/a/How-To-Make-Sulfuric-Acid-At-Home.htm / http://pyrorockets.tripod.com/ How to make concentrated sulfuric acid from a car battery
*http://chemistry.about.com/od/makechemicalsyourself/a/How-To-Make-Sulfuric-Acid-At-Home.htm / http://pyrorockets.tripod.com/ How to make concentrated sulfuric acid from a car battery
*http://www.instructables.com/id/Make-Sulfuric-Acid-by-Copper-Sulfate-Electrolysis/ How to make sulfuric acid by electrolysis of copper using an inert anode
*http://www.instructables.com/id/Make-Sulfuric-Acid-by-Copper-Sulfate-Electrolysis/ How to make sulfuric acid by electrolysis of copper using an inert anode
*http://www.instructables.com/id/Make-Sulfuric-acid-metabisulfiteoxidizer-method/ concentrated sulfuric acid from sodium metabisulfite, '''hydrochloric acid''' and an oxidant such as '''hydrogen peroxide''' or nitric acid (metabisulfite/oxidizer method)
*http://www.instructables.com/id/Make-Sulfuric-acid-metabisulfiteoxidizer-method/ concentrated sulfuric acid from sodium metabisulfite, hydrochloric acid and an oxidant such as hydrogen peroxide or nitric acid (metabisulfite/oxidizer method)


=== Hydrofluoric acid ===
==== Hydrofluoric acid ====
*[[File:Ambox_deletion.png]]  Warning: [[File:Ambox_deletion.png]]
*[[File:Ambox_deletion.png]]  Warning: [[File:Ambox_deletion.png]]


Line 94: Line 74:
  Because of the ability of hydrofluoric acid to penetrate tissue, poisoning can occur. Rinsing off is not enough.  
  Because of the ability of hydrofluoric acid to penetrate tissue, poisoning can occur. Rinsing off is not enough.  
  Accidental exposures can go unnoticed until a day after (too late).
  Accidental exposures can go unnoticed until a day after (too late).
 
   
  Corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines irreversibly.
 
*http://en.wikipedia.org/wiki/Hydrofluoric_acid#Health_and_safety
*http://en.wikipedia.org/wiki/Hydrofluoric_acid#Health_and_safety
*http://www.ncbi.nlm.nih.gov/pubmed/20512294 Finger burns caused by concentrated hydrofluoric acid, treated with intra-arterial calcium gluconate infusion: case report.


Porcelain etch gel contain low (9.6%) concentration of Hydrofluoric acid
Porcelain etch gel contain low (9.6%) concentration of Hydrofluoric acid


=== Hydrochloric Acid ===
==== Rosin ====
 
*https://en.wikipedia.org/wiki/Hydrochloric_acid#Safety
 
*https://www.youtube.com/watch?v=YGjd7xxTuZw
 
=== Chlorine ===
[[File:Imbox content.png]]  Warning:
 
Chlorine is a toxic gas that irritates the respiratory system. Used as chemical weapon.
 
widely used for purifying water owing to its powerful oxidizing properties, especially potable water supplies and water used in swimming pools.
 
=== Hydrogen peroxide ===
[[File:Imbox content.png]]  Warning:
 
Regulations vary, but low concentrations, such as 6%, are widely available and legal to buy for medical use.
Most over-the-counter peroxide solutions are not suitable for ingestion.
Higher concentrations may be considered hazardous
 
Can be used for the sterilization of various surfaces/tools or creating organic peroxide based explosive as improvised explosive devices.
When diluted H<sub>2</sub>O<sub>2</sub> (between 1.9% and 12%) mixed with ammonium hydroxide is used to bleach human hair.
 
=== Rosin ===
[[File:Imbox content.png]]  Warning:
[[File:Imbox content.png]]  Warning:


Boil a chip for a few hours in rosin, like used for soldering. Refluxing equipment is ideal. Should eat away the casing. Might be best used with Dremeling or other techniques to remove the majority of the epoxy first. The active ingredient for this is abietic acid.
Boil a chip for a few hours in rosin, like used for soldering. Refluxing equipment is ideal. Should eat away the casing. Might be best used with Dremeling or other techniques to remove the majority of the epoxy first. The active ingredient for this is abietic acid.


=== Acetone ===
==== Acetone ====
[[File:Imbox content.png]]  Warning:
[[File:Imbox content.png]]  Warning:


Line 137: Line 91:
Common Products Containing Acetone:
Common Products Containing Acetone:


*Nail polish and nail polish removers:
*Nail polish and nail polish removers
**https://www.youtube.com/watch?v=KFXTv9vKPOY Woman burned while removing nail polish
*lot of others daily products
*lot of others daily life products


=== Isopropanol ===
====Isopropanol====
[[File:Imbox content.png]]  Warning:
[[File:Imbox content.png]]  Warning:


  Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, [http://en.wikipedia.org/wiki/Central_nervous_system_depression CNS depression], nausea, vomiting, anesthesia, and coma.
  Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, CNS depression, nausea, vomiting, anesthesia, and coma.
  Poisoning can occur from ingestion, inhalation, or absorption; therefore, well-ventilated areas and protective gloves are recommended.  
  Poisoning can occur from ingestion, inhalation, or absorption; therefore, well-ventilated areas and protective gloves are recommended.  
  Around 15 g of isopropyl alcohol can have a toxic effect on a 70 kg human (the bigger they are the harder they fall).
  Around 15 g of isopropyl alcohol can have a toxic effect on a 70 kg human (the bigger they are the harder they fall).


=== Ethylenediamine ===
==== Ethylenediamine ====
[[File:Imbox content.png]]  Warning:
[[File:Imbox content.png]]  Warning:


  Ethylenediamine is a skin and respiratory irritant. Unless tightly contained, liquid ethylenediamine will release toxic  
  Ethylenediamine is a skin and respiratory irritant. Unless tightly contained, liquid ethylenediamine will release toxic and irritating vapors into its surroundings,  
and irritating vapors into its surroundings,  
  especially on heating. The vapors react with moisture in humid air to form a characteristic white mist, which is extremely irritating to skin, eyes, lungs and mucus
  especially on heating. The vapors react with moisture in humid air to form a characteristic white mist,  
membranes. Exposure to a relatively small amount of vapor or mist by inhalation can seriously damage health and may even result in death.
which is extremely irritating to skin, eyes, lungs and mucus membranes.  
Exposure to a relatively small amount of vapor or mist by inhalation can seriously damage health and may even result in death.


=== Ultrasonic bath ===
==== Ultrasonic bath ====


  An ultrasonic cleaning is a process that uses ultrasound (usually from 20–400 kHz) and an appropriate cleaning solvent (sometimes ordinary tap water) to clean items.
  An ultrasonic cleaning is a process that uses ultrasound (usually from 20–400 kHz) and an appropriate cleaning solvent (sometimes ordinary tap water) to clean items.


=== Deionized water ===
==== Deionized water ====
  Deionized water is a type of purified water with mineral ions (salts) removed. Deionized water is created by taking  
  Deionized water is a type of purified water with mineral ions (salts) removed. Deionized water is created by taking  
  conventional water and exposing it to electrically charged resins that attract  and bind to the salts, removing them from the water.
  conventional water and exposing it to electrically charged resins that attract  and bind to the salts, removing them from the water.


=== Microprobing ===
==== Safety ====
 
Microprobing techniques (invasive attacks) can be used, once the chip is depackaged, to access the chip surface directly,
thus we can observe, manipulate, and interfere with integrated circuit. 
 
Microprobing workstation: Its major component is a special optical microscope with a working distance of at least 8 mm between the chip surface and the objective lens.
On a stable platform around a socket for the test package, we install several micropositioners ,
which allow us to move a probe arm with submicrometer precision over a chip surface. On this arm, we install a probe needle.
These elastic probe hairs allow us to establish electrical contact with on-chip bus lines without damaging them.


== Safety ==
  Most if the items listed here are Prohibited Items (no fly)-hazardous materials (e.g. http://www.tsa.gov/traveler-information/prohibited-items)
 
  In most of countries, having them/making them/speaking/thinking/dreaming about them (with or without an proper license) is enough to put you in jail and being raped many time
  Most of the items listed here are Prohibited Items (no fly)-hazardous materials (e.g. http://www.tsa.gov/traveler-information/prohibited-items)
  Having them/making them/speaking/thinking/dreaming about them (with or without an proper license) is enough to put you in jail  
and being raped many time by many people/items.


*before: no fly items - studish/read - ...
*before: no fly items - studish/read - ...
*during: humble state of mind / not high/not drunk - ...
*during: humble state of mind / not high/not drunk - ...
*after: storage/disposal of hazardous items, nearest clinics - ....
*after: storage/disposal of hazardous items, nearest clinics - ....


*proper workplace/labs (not your kitchen table or RV vehicle as acids can cause [https://en.wikipedia.org/wiki/Spontaneous_combustion spontaneous combustion] with organics)
*proper workplace/labs (not your kitchen table or RV vehicle as acids can cause spontaneous combustion with organics)
*fume Cabinet
*Fume Cabinet
*acid-prof gloves
*acid-prof gloves
*protection glasses
*protection glasses
*protective suit and shoes
*protective suit
*wear a cap and tied your hairs
...
...


== Others ways ==
----
<div style="float:right">[[File:Chemistry-hazardous.png|200px|thumb|left|play it safety]]</div>


==== Others ways ====
*the safe way: services
*the safe way: services
*the explosive way: https://siliconpr0n.org/wiki/doku.php?id=decap:explosive
*the explosive way: https://siliconpr0n.org/wiki/doku.php?id=decap:explosive
*the burning way: propane or butane torch (no wires remaining)
*the burning way: propane or butane torch (no wires remaining)
*the Indian way: razzorblade (e.g. [http://www.psdevwiki.com/ps3/File:RSX_die_-_Image_made_by_H%C3%A9ctor_Mart%C3%ADn.jpg RSX die], scraped with razorblade by '''Héctor Martín''' aka '''Marcan''')
*the Indian way: razzorblade (e.g. [http://www.psdevwiki.com/ps3/File:RSX_die_-_Image_made_by_H%C3%A9ctor_Mart%C3%ADn.jpg RSX die], scraped with razorblade by '''Héctor Martín''' aka '''Marcan''')
 
*the laser way https://www.youtube.com/watch?v=J00BEGsqIZE
*the laser way:
**https://www.youtube.com/watch?v=J00BEGsqIZE
**https://www.jamiecraig.com/de-encapsulating-ics-with-a-laser-cutter/
**the CO2 laser way: http://hackaday.com/2015/08/29/co2-laser-decapping-to-fix-soldering-mistake/
 
*the portal way: http://www.nordson.com/en-us/divisions/march/support/Literature/Documents/Nordson-MARCH-Mold-Decap-Article-USTech-July2012.pdf vacuum plasma
*the portal way: http://www.nordson.com/en-us/divisions/march/support/Literature/Documents/Nordson-MARCH-Mold-Decap-Article-USTech-July2012.pdf vacuum plasma
*the brute force: way https://www.youtube.com/watch?v=tjjIyJxqOqE brute force (several people apparently insist that this is not decapping but just destroying)
*the longest way:
...
...


== Related articles ==
==== Related articles ====
<div style="float:right">[[File:PS4_GP_uWIRE_XRAY_G365_1.jpg|250px|thumb|left|Microwires inside an IC ([[DualShock 4]])]]</div>
[[Soldering_Tips/Guides|Soldering Tips/Guides]]
 
*[[Soldering_Tips/Guides|Soldering Tips/Guides]]
*[[Components#Xray|Xray]]
...
...
----
----
Please note that all contributions to PS4 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS4 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page: