Internal: Difference between revisions
Jump to navigation
Jump to search
m (→UART) |
m (→UART) |
||
Line 166: | Line 166: | ||
<div style="float:right">[[File:UART0 Console - UART MediaCon.png|200px|thumb|left|UART0 Console - UART [[MediaCon]] as seen on [[SAA-001]] (same layout on [[SAA-K23]], [[SAB-K02]], and [[SAB-001]])]]</div> | <div style="float:right">[[File:UART0 Console - UART MediaCon.png|200px|thumb|left|UART0 Console - UART [[MediaCon]] as seen on [[SAA-001]] (same layout on [[SAA-K23]], [[SAB-K02]], and [[SAB-001]])]]</div> | ||
Same layout is used for [[SAA-K23]], [[SAB-K02]] / [[SAA-001]], [[SAB-001]] | Same layout is used for [[SAA-K23]], [[SAB-K02]] / [[SAA-001]], [[SAB-001]] (pads are present on [[SAC-001]] too, but layout slightly differs) | ||
3.3V CMOS TTL - 115200, n, 8.1 | 3.3V CMOS TTL - 115200, n, 8.1 |
Revision as of 09:30, 3 July 2015
Internal Pads
At this moment it is not yet documented what use the pads have (e.g. Service Connectors, SPI, I2C, JTAG, PCIe etc.)
pads 1 (GbLAN)
GbLAN MDIO
Pin | Name | Description |
---|---|---|
1 | Vcc | Internal +5V |
2 | Vcc | Internal +5V |
3 | Vcc | Internal +5V |
4 | Vcc | Internal +5V |
5 | ||
6 | ||
7 | Gnd | Internal ground |
8 | ||
9 | Gnd | Internal ground |
10 | ||
11 | Gnd | Internal ground |
12 | ||
13 | Gnd | Internal ground |
14 | Gnd | Internal ground |
pads 2 (MediaCon)
MediaCon debug (No activity was detected so far. It looks to be disabled / turned off)
Pin | Name | Description |
---|---|---|
1 | ||
2 | Gnd | Internal ground |
3 | ||
4 | ||
5 | ||
6 | ||
7 | ||
8 | Gnd | Internal ground |
9 | ||
10 | Gnd | Internal ground |
11 | 3.3V when console is started | |
12 | ||
13 | ||
14 | ||
15 | ||
16 | ||
17 | Gnd | Internal ground |
18 | ||
19 | Gnd | Internal ground |
20 | Vcc | +3.3V_STBY power (always on, including the deep standby) |
pads 3 (A01-C0L)
Pin | Name | Description |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | Gnd | Internal ground |
7 | I2C | I2C bus (100 kHz clock) |
8 | Gnd | Internal ground |
9 | ||
10 | ||
11 | ||
12 | ||
13 | Gnd | Internal ground |
14 | ||
15 | ||
16 | ||
17 | Gnd | Internal ground |
18 | ||
19 | ||
20 | ||
21 | ||
22 | Gnd | Internal ground |
23 | ||
24 | ||
25 | Gnd | Internal ground |
26 | ||
27 | ||
28 | ||
29 | ||
30 |
UART
Same layout is used for SAA-K23, SAB-K02 / SAA-001, SAB-001 (pads are present on SAC-001 too, but layout slightly differs)
3.3V CMOS TTL - 115200, n, 8.1
UART0 Console
Pin | Name | Description |
---|---|---|
GND | Ground | |
U0C_TX | UART0 Console Transmit | |
U0C_RX | UART0 Console Receive |
Note: quite useless, as the output is zeroed out by "spaces" on retail models
UART MediaCon
Pin | Name | Description |
---|---|---|
GND | Ground | |
UMC_TX | UART MediaCon Transmit | |
UMC_RX | UART MediaCon Receive |
Note: quite simular to PS3 Syscon UART
|