Internal: Difference between revisions
Jump to navigation
Jump to search
m (→UART) |
CelesteBlue (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
== Internal Pads == | == Internal Pads == | ||
<gallery> | <gallery> | ||
File:CUH-10xxA - SAA-001 - pads-1.png|[[CUH-10xxA]] [[SAA-001]] [[#pads 1 (GbLAN)|pads 1 (GbLAN)]] | File:CUH-10xxA - SAA-001 - pads-1.png|[[CUH-10xxA]] [[SAA-001]] [[#pads 1 (GbLAN)|pads 1 (GbLAN)]] | ||
Line 6: | Line 7: | ||
</gallery> | </gallery> | ||
It is not documented yet what use the pads have (e.g. [[Service Connectors]], SPI, I2C, JTAG, [[PCIe]] etc.) | |||
=== pads 1 (GbLAN) === | === pads 1 (GbLAN) === | ||
<div style="float:right">[[File:CUH-10xxA - SAA-001 - 14 pins port - img1.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads1/14 pins - img1]]<br />[[File:CUH-10xxA - SAA-001 - 14 pins port - img2.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads1/14 pins - img1]]</div> | <div style="float:right">[[File:CUH-10xxA - SAA-001 - 14 pins port - img1.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads1/14 pins - img1]]<br />[[File:CUH-10xxA - SAA-001 - 14 pins port - img2.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads1/14 pins - img1]]</div> | ||
[[GbLAN]] MDIO | [[GbLAN]] MDIO | ||
Line 46: | Line 48: | ||
=== pads 2 (MediaCon) === | === pads 2 (MediaCon) === | ||
<div style="float:right">[[File:CUH-10xxA - SAA-001 - 20 pins port - img1.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads2/20 pins - img1]]<br />[[File:CUH-10xxA - SAA-001 - 20 pins port - img2.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads2/20 pins - img2]]</div> | <div style="float:right">[[File:CUH-10xxA - SAA-001 - 20 pins port - img1.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads2/20 pins - img1]]<br />[[File:CUH-10xxA - SAA-001 - 20 pins port - img2.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads2/20 pins - img2]]</div> | ||
[[MediaCon]] debug (No activity was detected so far. It looks to be disabled / turned off) | [[MediaCon]] debug (No activity was detected so far. It looks to be disabled / turned off) | ||
Line 95: | Line 98: | ||
=== pads 3 (A01-C0L) === | === pads 3 (A01-C0L) === | ||
<div style="float:right">[[File:CUH-10xxA - SAA-001 - 30 pins port - img1.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads3/30 pins - img1]]<br />[[File:CUH-10xxA - SAA-001 - 30 pins port - img2.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads3/30 pins - img2]]</div> | <div style="float:right">[[File:CUH-10xxA - SAA-001 - 30 pins port - img1.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads3/30 pins - img1]]<br />[[File:CUH-10xxA - SAA-001 - 30 pins port - img2.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] pads3/30 pins - img2]]</div> | ||
[[A01-C0L]] | [[A01-C0L]] | ||
Line 164: | Line 168: | ||
== UART == | == UART == | ||
<div style="float:right">[[File:UART0 Console - UART MediaCon.png|200px|thumb|left|UART0 Console - UART [[MediaCon]] as seen on [[SAA-001]] (same layout on [[SAA-K23]], [[SAB-K02]], and [[SAB-001]])]]</div> | <div style="float:right">[[File:UART0 Console - UART MediaCon.png|200px|thumb|left|UART0 Console - UART [[MediaCon]] as seen on [[SAA-001]] (same layout on [[SAA-K23]], [[SAB-K02]], and [[SAB-001]])]]</div> | ||
Line 170: | Line 175: | ||
3.3V CMOS TTL - 115200, n, 8.1 | 3.3V CMOS TTL - 115200, n, 8.1 | ||
* [http://jaicrab.org/Ps4/Tools/UART/JaiBrute2.zip JaiBrute v2] {{MD5|f71e4beebbbb859f74dc536c9e824acb}} | |||
* [http://jaicrab.org/Ps4/Tools/UART/JaiBrute.zip JaiBrute v1] {{MD5|f7a7e0f970d5e86ef110d2d4ff0ed1b1}} | |||
=== UART0 Console === | === UART0 Console === | ||
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | {| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | ||
|- bgcolor="#cccccc" | |- bgcolor="#cccccc" | ||
Line 186: | Line 193: | ||
|}'''Note:''' quite useless, as the output is zeroed out by "spaces" on retail models | |}'''Note:''' quite useless, as the output is zeroed out by "spaces" on retail models | ||
=== UART | === MediaCon UART === | ||
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | {| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | ||
|- bgcolor="#cccccc" | |- bgcolor="#cccccc" | ||
Line 193: | Line 201: | ||
| || GND || Ground | | || GND || Ground | ||
|- | |- | ||
| || UMC_TX || UART | | || UMC_TX || MediaCon UART Transmit | ||
|- | |- | ||
| || UMC_RX || UART | | || UMC_RX || MediaCon UART Receive | ||
|- | |- | ||
|}'''Note:''' quite | |}'''Note:''' quite similar to [http://www.psdevwiki.com/ps3/Syscon_Hardware#Syscon_UART PS3 Syscon UART] | ||
{{Motherboard Components}} | {{Motherboard Components}} | ||
<noinclude>[[Category:Main]]</noinclude> | <noinclude>[[Category:Main]]</noinclude> |
Revision as of 23:19, 24 February 2021
Internal Pads
It is not documented yet what use the pads have (e.g. Service Connectors, SPI, I2C, JTAG, PCIe etc.)
pads 1 (GbLAN)
GbLAN MDIO
Pin | Name | Description |
---|---|---|
1 | Vcc | Internal +5V |
2 | Vcc | Internal +5V |
3 | Vcc | Internal +5V |
4 | Vcc | Internal +5V |
5 | ||
6 | ||
7 | Gnd | Internal ground |
8 | ||
9 | Gnd | Internal ground |
10 | ||
11 | Gnd | Internal ground |
12 | ||
13 | Gnd | Internal ground |
14 | Gnd | Internal ground |
pads 2 (MediaCon)
MediaCon debug (No activity was detected so far. It looks to be disabled / turned off)
Pin | Name | Description |
---|---|---|
1 | ||
2 | Gnd | Internal ground |
3 | ||
4 | ||
5 | ||
6 | ||
7 | ||
8 | Gnd | Internal ground |
9 | ||
10 | Gnd | Internal ground |
11 | 3.3V when console is started | |
12 | ||
13 | ||
14 | ||
15 | ||
16 | ||
17 | Gnd | Internal ground |
18 | ||
19 | Gnd | Internal ground |
20 | Vcc | +3.3V_STBY power (always on, including the deep standby) |
pads 3 (A01-C0L)
Pin | Name | Description |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | Gnd | Internal ground |
7 | I2C | I2C bus (100 kHz clock) |
8 | Gnd | Internal ground |
9 | ||
10 | ||
11 | ||
12 | ||
13 | Gnd | Internal ground |
14 | ||
15 | ||
16 | ||
17 | Gnd | Internal ground |
18 | ||
19 | ||
20 | ||
21 | ||
22 | Gnd | Internal ground |
23 | ||
24 | ||
25 | Gnd | Internal ground |
26 | ||
27 | ||
28 | ||
29 | ||
30 |
UART
Same layout is used for SAA-K23, SAB-K02 / SAA-001, SAB-001 (pads are present on SAC-001 too, but layout slightly differs)
3.3V CMOS TTL - 115200, n, 8.1
UART0 Console
Pin | Name | Description |
---|---|---|
GND | Ground | |
U0C_TX | UART0 Console Transmit | |
U0C_RX | UART0 Console Receive |
Note: quite useless, as the output is zeroed out by "spaces" on retail models
MediaCon UART
Pin | Name | Description |
---|---|---|
GND | Ground | |
UMC_TX | MediaCon UART Transmit | |
UMC_RX | MediaCon UART Receive |
Note: quite similar to PS3 Syscon UART
|