Jump to navigation Jump to search
|1||Another voltage input?|
|2||Another voltage input?|
|6||UART RX (CPU/Syscon)|
|7||UART TX (CPU/Syscon)|
|8||UART CTS (CPU/Syscon)|
|9||UART RTS (CPU/Syscon)|
|11||headset control GND|
|12||headset control data / mic|
|13||Unknown, connected to Wolfson Micro WM1803E DAC|
|15||Unknown, connected to MB44C026A IC|
|17||+5V charge input|
|18||+5V charge input|
The accessory port found only on the original Vita models is a custom port USB interface. The port must be activated in software and so far, there does not seem to be any official public software that uses it. As of firmware 1.69, all APIs that reference the accessory port are permanently disabled.
The only documented usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework.
The port appears to be the same as used on the Panasonic K1HA14AD0001.