Syscon Error Codes
Description
Syscon memory contains a table of size 0x100 bytes intended to store error codes, every error code is composed by 4 bytes + another 4 bytes for its timestamp, in total the table can store 32 errors. When the table is full of errors and a new error needs to be stored syscon deletes the oldest
How to get the syscon error log
If the PS3 still boots up to the XMB and is able to install and run apps you can use programs like the ones mentioned at top of Platform ID page
If the PS3 doesnt boots is still posible to retrieve the syscon error log by connecting a PC to syscon UART port using a "USB to TTL UART adapter" and running the command errlog. There is also the command clearerrlog to empty the error table (handy to prevent confusions with old error codes that could be cummulated along the months/years and not related with the actual problem)
Error log format
There are 2 formats that depends of the syscon type: for Mullion, or for Sherwood
The timestamps are in UTC format (number of elapsed seconds since 2000). If the battery/cell was empty or removed when the error was triggered the timestamp is recorded as FFFFFFFF
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00003700 01 10 80 A0 01 10 80 A0 01 10 80 A0 01 10 80 A0 ..€ ..€ ..€ ..€ 00003710 01 10 80 A0 01 10 80 A0 04 10 80 A0 01 10 80 A0 ..€ ..€ ..€ ..€ 00003720 01 10 80 A0 01 10 80 A0 01 10 80 A0 01 10 80 A0 ..€ ..€ ..€ ..€ 00003730 01 10 80 A0 04 10 80 A0 01 10 80 A0 01 10 80 A0 ..€ ..€ ..€ ..€ 00003740 01 10 80 A0 01 10 80 A0 01 10 80 A0 01 10 80 A0 ..€ ..€ ..€ ..€ 00003750 01 10 80 A0 01 10 80 A0 04 30 09 A0 04 30 09 A0 ..€ ..€ .0. .0. 00003760 04 30 09 A0 04 30 09 A0 FF FF FF FF 01 10 80 A0 .0. .0. ÿÿÿÿ..€ 00003770 01 10 80 A0 01 10 80 A0 01 10 80 A0 01 10 80 A0 ..€ ..€ ..€ ..€ 00003780 20 CF 6D 16 13 23 A7 16 3E D6 D9 16 87 13 2A 17 Ïm..#§.>ÖÙ.‡.*. 00003790 17 3C 7C 17 E4 A2 A3 17 A2 15 D4 17 13 FB EB 17 .<..䢣.¢.Ô..ûë. 000037A0 CD 7D EF 17 33 85 EF 17 12 8C EF 17 A7 D9 FB 17 Í}ï.3…ï..Œï.§Ùû. 000037B0 58 5E 0E 18 BB C9 66 18 CD 25 B5 18 49 C4 29 19 X^..»Éf.Í%µ.IÄ). 000037C0 75 D5 F9 19 04 8B 61 1B 17 67 D0 22 2D 67 D0 22 uÕù..‹a..gÐ"-gÐ" 000037D0 03 07 6C 27 12 09 6C 27 FF FF FF FF FF FF FF FF ..l'..l'ÿÿÿÿÿÿÿÿ 000037E0 FF FF FF FF FF FF FF FF F0 E7 27 16 06 BD 33 16 ÿÿÿÿÿÿÿÿðç'..½3. 000037F0 E5 DE 38 16 DD D4 5C 16 C4 AC 6C 16 EA C7 6D 16 åÞ8.ÝÔ\.Ĭl.êÇm.
- In the errorlog sample above:
- Contains errors: A080 1 001 , A080 1 004 , A009 3 004
- Timestamps are valid
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00003700 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003710 22 43 40 A0 34 30 40 A0 FF FF FF FF 34 30 40 A0 "C@ 40@ ÿÿÿÿ40@ 00003720 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003730 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003740 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003750 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003760 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003770 22 43 40 A0 34 30 40 A0 22 43 40 A0 34 30 40 A0 "C@ 40@ "C@ 40@ 00003780 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 00003790 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000037A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000037B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000037C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000037D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000037E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000037F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
- In the errorlog sample above:
- Contains errors: A040 4 322 , A040 3 034
- Timestamps are invalid (caused by a missing battery while doing repair jobs)
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000900 31 21 80 A0 73 D4 50 0B 30 20 40 A0 89 D4 50 0B 1!€ sÔP.0 @ ‰ÔP. 00000910 31 21 80 A0 8C D4 50 0B 30 20 80 A0 8E D4 50 0B 1!€ ŒÔP.0 € ŽÔP. 00000920 30 21 80 A0 8E D4 50 0B 31 21 80 A0 8F D4 50 0B 0!€ ŽÔP.1!€ .ÔP. 00000930 01 30 00 A0 FF FF FF FF FF FF FF FF FF FF FF FF .0. ÿÿÿÿÿÿÿÿÿÿÿÿ 00000940 30 20 80 A0 75 D1 50 0B 30 20 80 A0 78 D1 50 0B 0 € uÑP.0 € xÑP. 00000950 30 20 80 A0 B2 D1 50 0B 31 20 80 A0 B3 D1 50 0B 0 € ²ÑP.1 € ³ÑP. 00000960 30 21 80 A0 BD D1 50 0B 30 21 80 A0 D5 D1 50 0B 0!€ ½ÑP.0!€ ÕÑP. 00000970 30 21 80 A0 DF D1 50 0B 30 20 80 A0 E0 D1 50 0B 0!€ ßÑP.0 € àÑP. 00000980 31 21 80 A0 84 D2 50 0B 30 21 80 A0 DC D2 50 0B 1!€ „ÒP.0!€ ÜÒP. 00000990 31 21 32 A0 4F D3 50 0B 31 20 40 A0 50 D3 50 0B 1!2 OÓP.1 @ PÓP. 000009A0 31 21 80 A0 51 D3 50 0B 30 21 80 A0 57 D3 50 0B 1!€ QÓP.0!€ WÓP. 000009B0 31 21 80 A0 59 D3 50 0B 31 21 80 A0 FF D3 50 0B 1!€ YÓP.1!€ ÿÓP. 000009C0 31 21 80 A0 05 D4 50 0B 30 20 80 A0 06 D4 50 0B 1!€ .ÔP.0 € .ÔP. 000009D0 30 20 80 A0 07 D4 50 0B 31 21 80 A0 2D D4 50 0B 0 € .ÔP.1!€ -ÔP. 000009E0 31 20 80 A0 3A D4 50 0B 30 21 80 A0 42 D4 50 0B 1 € :ÔP.0!€ BÔP. 000009F0 30 21 80 A0 72 D4 50 0B 31 21 80 A0 72 D4 50 0B 0!€ rÔP.1!€ rÔP.
- In the errorlog sample above:
- Contains errors: A080 2 131 , A040 2 030 , A080 2 030 , A080 2 130 , A000 3 001
- Timestamps are valid
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000900 02 18 61 A0 FF FF FF FF 02 18 61 A0 FF FF FF FF ..a ÿÿÿÿ..a ÿÿÿÿ 00000910 02 18 61 A0 FF FF FF FF 02 18 61 A0 FF FF FF FF ..a ÿÿÿÿ..a ÿÿÿÿ 00000920 02 18 61 A0 FF FF FF FF 02 18 61 A0 FF FF FF FF ..a ÿÿÿÿ..a ÿÿÿÿ 00000930 02 18 61 A0 FF FF FF FF 02 18 61 A0 FF FF FF FF ..a ÿÿÿÿ..a ÿÿÿÿ 00000940 02 18 61 A0 FF FF FF FF 02 18 61 A0 FF FF FF FF ..a ÿÿÿÿ..a ÿÿÿÿ 00000950 02 18 61 A0 FF FF FF FF 02 18 61 A0 FF FF FF FF ..a ÿÿÿÿ..a ÿÿÿÿ 00000960 02 18 61 A0 FF FF FF FF 02 40 40 A0 FF FF FF FF ..a ÿÿÿÿ.@@ ÿÿÿÿ 00000970 34 30 40 A0 FF FF FF FF 02 40 40 A0 FF FF FF FF 40@ ÿÿÿÿ.@@ ÿÿÿÿ 00000980 34 30 40 A0 FF FF FF FF 02 40 40 A0 FF FF FF FF 40@ ÿÿÿÿ.@@ ÿÿÿÿ 00000990 34 30 40 A0 FF FF FF FF 02 40 40 A0 FF FF FF FF 40@ ÿÿÿÿ.@@ ÿÿÿÿ 000009A0 34 30 40 A0 FF FF FF FF 02 40 40 A0 FF FF FF FF 40@ ÿÿÿÿ.@@ ÿÿÿÿ 000009B0 34 30 40 A0 FF FF FF FF 02 40 40 A0 FF FF FF FF 40@ ÿÿÿÿ.@@ ÿÿÿÿ 000009C0 34 30 40 A0 FF FF FF FF FF FF FF FF FF FF FF FF 40@ ÿÿÿÿÿÿÿÿÿÿÿÿ 000009D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000009E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 000009F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
- In the errorlog sample above:
- Contains errors: A061 1 802 , A040 4 002 , A040 3 034
- Timestamps are invalid (caused by a missing battery while doing repair jobs)
Error code format
The error codes follows the format: A R ST C ERR , where:
- A (Fixed)
- A = This is always "A"
- R (Reserved)
- 0-E = Unknown
- F = Frequent error (For example, Motherboard Damage/Breakdown, etc.)
- ST (Step Number)
- 00-7F = Step Number of the Power On Sequence (POS). This is the Power On Self Test (POST) process. If successful, the BOOT process begins, which loads the OS.
- 80 = Static State (Power ON). The console completed the POST and was in a static state. The error happened when the PS3 was powered on. You can get an error with Step No. 80 if your error occurs in game. For example, 80 1002 errors can happen if your NEC/TOKINs are going bad.
- 90 = Static State (Power OFF). The error happened when the PS3 was powering off. For example, if a problem causes the system to hang while shutting down the console will beep before powering off. An error with step no. 90 will be recorded in the errorlog.
- A0 = Immediately after SYSCON reset. A reset pulse is sent to the console's main chipset to coordinate and synchronize them. If an error occurs immediately after SYSCON reset, it means it occurred before anything else can happen. For example, if the CPU is completely dead it will not respond to the reset pulse and an error will be generated immediately after reset.
- C (Category)
- 1 = System Error
- 2 = Fatal Error
- 3 = Boot Error
- 4 = Data Error
- ERR (Error)
- Any number in hex
Examples:
A0801002
- System Error 002 (RSX VRAM Power Fail) which occurred while the System was successfully powered On.
- 1002 errors are known to be caused by bad NEC/TOKINs, but may not be the only cause. See Error Code section below for more details.
A0403034
- Fatal Booting Error 034 (RSX/CELL Communication Error) which occurred at step no. 40, before the Power On Sequence completed.
- 3034 errors are known to be caused by BGA Defects (among other issues). See Error Code section below for more details.
While the Reserved Area and Step Number can be useful to figure out when the error occurred and how frequent it is, the last four numbers are the most important for figuring out what the error means. So the following Error Code section will only list the last 4 numbers (category + error).
Error codes
System Errors
1001 (Power CELL)
- Components Involved:
Speculation:
1001 errors happen when the system encounters an unexpected shutdown. They often occur in testing, when the console is turned on/off a lot, instead of graceful shutdown. They have been associated with other errors, but there doesn't appear to be any single cause.
The hypothesis that this error is associated with insufficient Filtering on CPU's core voltage (VDDC) has not been confirmed. There is a range of voltage ripple/noise that "should" cause errors before it gets so bad it causes a CELL VDDC Power Failure (3003). There are numerous SMD components involved in filtering, but the main concern are the NEC/TOKIN Proadlizers (capacitors). 1002 errors are the fingerprint of bad tokins on the GPU, but 1001 has not been shown to have the same association with the CPU's filter. However, a connection is strongly suspected.
1002 (Power RSX)
- Components Involved:
This error has been associated with insufficient Filtering on RSX_VDDC power line. There is a range of voltage ripple/noise that will cause this error before it gets so bad it causes an RSX_VDDC Power Failure (3004). YLOD's causing 1002's range in duration from 2 seconds to only occurring during intense games.
There are numerous SMD components involved in filtering, but the main concern are the NEC/TOKIN Proadlizers (capacitors). 1002 errors are the fingerprint of bad tokins.
1004 (Power AC/DC)
- Components Involved:
1103 (Thermal)
- Components Involved:
- See: Thermal
1200 (Thermal CELL)
- Components Involved:
CPU Overheat. This is a common error. The usual culprit is failed Thermal Interface Material (TIM). As the material ages it "dries" allowing air inside. Air is a heat insulator, reducing the TIM's ability to transfer enough heat away from the processor. The system fan will steadily get louder over time until it cannot keep up. Once the processor approaches it's Thermal Shutdown Temperature a Yellow LED begins flashing on the console (Early Phat Models). Once it reaches the Thermal Shutdown Temperature the console will beep three times and hard shutdown, flashing red until the console is unplugged and the error state reset. Error 1200 is generated in the SYSCON errorlog.
First be sure the system fan is working. If so, apply new TIM Between the Internal Heat Spreader (IHS) and Heatsink (HS). If that does not resolve the problem, carefully remove the IHS (Delid) and replace the TIM between the IHS and processor DIE.
If that still doesn't work, it could be an issue with the temperature monitor chip (IC1101). Beyond that, some users have noted that dead CPU's can throw error 1200. However, that's the limit of our current understanding. It could be dead, or have another unexplained issue, but usually reflowing or reballing is the last ditch effort to revive such a console.
1201 (Thermal RSX)
- Components Involved:
GPU Overheat. This is the same as error 1200 above, except it's for the GPU. The same repair steps apply, except it's Temperature Monitor Chip is IC2101.
1203 (Thermal CELL VR)
- Components Involved:
- CELL voltage regulators
- Temperature Monitors
Some PS3 motherboards (TMU-520, COK-001, COK-002), have a temperature monitor located somewhere in the CELL power block. The other retail PS3 motherboard models doesnt meassures the temperature of the CELL VR
All the PS3 temperature monitor chips have a internal thermal sensor integrated + 2 pins for an optional external sensor. The temperature monitors for CELL and RSX are configured to use the external sensor, but this one for CELL VR probably uses the internal
1204 (Thermal South Bridge)
- Components Involved:
1205 (Thermal EE/GS)
- Components Involved:
- CXD2953AGB or CXD2972GB
- See also: Emotion Engine / Graphics Synthesizer
This error is specific for COK-001/CXD2953AGB (with full PS2 hardware compatibility, EE+GS) or COK-002/CXD2972GB (with partial PS2 hardware compatibility, GS only)
1301
CELL PLL
14FF
Check stop
1601
BE Livelock Detection
Speculation: If a YLOD turns into a GLOD after reball/reflow then 1601 (with or without 1701) could mean the RSX RAM was damaged. This is a loose association based on a few user reports.
1701
CELL attention
1802
RSX init
1900 (RTC Voltage)
RTC voltage
1901 (RTC Oscilator)
RTC oscilator
1902 (RTC Access)
RTC access
Fatal Errors
- This error codes seems to be repeated up to 3 times for 3 special cases, as example, errors 2003, 2103, 2203 are related to southbridge, the only thing that changes in the error code is the second digit (located inmediatly after the category). If at some point we find what means that digit we can join the wiki page sections together (with titles: "2001 & 2101", "2002 & 2102", "2003 & 2103", etc...)
2001 (CELL)
CELL (IC1001)
2002 (RSX)
RSX (IC2001)
2003 (South Bridge)
South Bridge Error (IC3001)
2010 (Clock Subsystems)
Clock Generator Error (IC5001)
2011 (Clock CELL)
Clock Generator Error (IC5003)
2012 (Clock CELL)
Clock Generator Error (IC5002)
2013 (Clock CELL, RSX, South Bridge)
Clock Generator Error (IC5004)
2020 (HDMI)
HDMI Error (IC2502)
2022 (DVE)
DVE Error (IC2406, CXM4024R MultiAV controller for analog out)
2024 (AV)
This error tends to cause a delayed Yellow Light Of Death (10s - 1min). Sometimes described as a Green Light Of Death (GLOD) or Red Light Of Death (RLOD).
2124 and 2024 errors have been fixed by replacing both the AV and HDMI encoders. One user reported 2024/2124 errors resolved by replacing the HDMI encoder. Another removed the HDMI encoder and tested the console without it. That console primarily filled the errorlog with 2124 errors, but a few 2024's as well. So it is unclear if 2124 is specific to the HDMI Encoder or AV Encoder. It seems it could be either.
2030 (Thermal Sensor, CELL)
- Components Involved:
- CELL
- CELL Temperature Monitor (IC1101 on COK-001)
Speculation: 2030-33 errors reported in case of dodgy PWR/EJT daughter board.
2031 (Thermal Sensor, RSX)
- Components Involved:
- RSX
- RSX Temperature Monitor (IC2101 on COK-001)
2033 (Thermal Sensor, South Bridge)
- Components Involved:
- South Bridge
- South Bridge Temperature Monitor (IC3101 on COK-001)
2101 (CELL)
CELL (IC1001)
2102 (RSX)
RSX (IC2001)
2103 (South Bridge)
Southbridge Error (IC3001)
2110 (Clock Subsystems)
Clock Generator Error (IC5001)
This error has been resolved by a number of users who had a short on F6001. It is important to note that something usually causes that fuse to blow, like a short. So it's important to troubleshoot the board to find and repair the shorting component before replacing the fuse. Otherwise the new one will blow too.
One user, who resolved this error on his C model PS3, noted "very short YLOD. Error code shows 2110[...]Some earlier code shows 1001 and 1002." The 1001 & 1002 errors he noted in the log before the 2110 appeared may have been a clue that C6019 was deteriorating. Further investigation is needed to confirm this hypothesis, however. In his case, C6019 was shorting and caused F6001 to blow. This short overloaded F6001 and cut power to many Subsystems, such as the HDD, USB ports, South bridge, CPU, GPU, etc.
One particularly noteworthy component is IC6020, which supplys +3.3v_MK_Vdd to the clock generator (IC5001). When F6001 blows, a 02 2110 is generated. A step number of 02 is very early in the power on sequence (POS), which explains why 2110 is triggered instead of another error code. Since the clock generator is critical for timing, it is one of the first things the SYSCON checks during the POS.
2111 (Clock CELL)
Clock Generator Error (IC5003)
2112 (Clock CELL)
Clock Generator Error (IC5002)
2113 (Clock CELL, RSX, South Bridge)
Clock Generator Error (IC5004)
2120 (HDMI)
HDMI Error (IC2502)
2122 (DVE)
DVE Error (IC2406, CXM4024R MultiAV controller for analog out)
2124 (AV)
This error tends to cause a delayed Yellow Light Of Death (10s - 1min). Sometimes described as a Green Light Of Death (GLOD) or Red Light Of Death (RLOD).
2124 and 2024 errors have been fixed by replacing both the AV and HDMI encoders. One user reported 2024/2124 errors resolved by replacing the HDMI encoder. Another removed the HDMI encoder and tested the console without it. That console primarily filled the errorlog with 2124 errors, but a few 2024's as well. So it is unclear if 2124 is specific to the HDMI Encoder or AV Encoder. It seems it could be either.
2130 (Thermal Sensor, CELL)
- Components Involved:
- CELL
- CELL Temperature Monitor (IC1101 on COK-001)
2131 (Thermal Sensor, RSX)
- Components Involved:
- RSX
- RSX Temperature Monitor (IC2101 on COK-001)
2133 (Thermal Sensor, South Bridge)
- Components Involved:
- South Bridge
- South Bridge Temperature Monitor (IC3101 on COK-001)
2203 (South Bridge)
South Bridge Error (IC3001)
Fatal Boot Errors
3000
Power Failure
3001
12v Power Failure
Usually this caused by a bad Power Supply Unit (PSU).
Alternatively, a failure on the 12v_main line can cause it. Check fuses, capacitors, resistors, and IC's on the 12v line. Measure resistance of the large 2 prong 12v connector on the motherboard. It should read in the Kilo ohms range if there is sufficient separation. Otherwise you may have a short somewhere on the line.
3002
Power Failure
3003
VDDC CELL Power Failure
This error will occur in the case of a PWR failure on the main core voltage of the CPU. For example, if the filtering capacitors (NEC/TOKIN's) are severely damaged. There are other SMD's in that filter, so it could be related to them as well.
3004
VDDC RSX Power Failure
This error will occur in the case of a PWR failure on the main core voltage of the GPU. For example, if the filtering capacitors (NEC/TOKIN's) are severely damaged. There are other SMD's in that filter, so it could be related to them as well.
3010
CELL Error
Observation: A user triggered this error by injecting 3.3V into PWRGD (power good) of IC6103 (NCP5318 CPU Buck Controller). It generated error 20 1001 and 20 3010.
3011
3012
3013
BE_SPI DI/DO ERROR
CELL not communicating to syscon via SPI (1.2V MC2_VDDIO and 1.2V BE_VCS no output) = Possible shorts on the line, check C4001 and trailing caps. Possible dead CPU?
Another user had one on a CPU he damaged while deliding.
3020
3030
3031
3032
CELL Error
+1.2v_YC_RC_VDDIO PWR Fail?
3033
3034
CELL / RSX Communication Error
This is the most common error seen in early Phat model PS3's with the hottest 90nm RSX and CELL processors. It is the hallmark of a BGA defect (such as a cracked solder ball). It is by no means limited to the early models, however. These arrors have been seen in every model of PS3 with varying frequency. The most reliable consoles appear to be those with a CPU/GPU of smaller manufacturing process, such as the Super Slim (SS) models (42xx and later) which have a 45nm CELL and 28nm RSX. The least reliable are the PS2 Backwards Compatable A-E Models, which have 90nm RSX/CELL.
The root cause is mechanical fatigue due to thermal cycling. The materials used to contruct the motherboard and processors have different properties. For example, the cooefficient of thermal expansion for FR4 Fiberglass used in the Motherboard and Processor Substrate is different than that of the copper BGA pads, which is different than that of the Lead-Free solder used to join them. This means they will expand and contract at different rates as the chip heats up and cools down, which applies shearing force to the BGA. Over many thermal cycle this deforms the solder balls and cause a defect (Such as a solder crack, torn trace, or the ball may pull away from the pad).
3034 is triggered when the voltage or data lines connecting the CPU/GPU are broken. There is often a data error (4XXX) that also appears, but not always. The most common cause is a BGA defect on the RSX, which usually requires a reball/reflow to repair. Something about the RSX construction or workload causes it to fail more frequently, but the CPU can fail too. However, it's not always a BGA defect. The bumps on either chip can fail, Flex IO traces (the data lines that connect the CPU/GPU) can be broken/scratched, or accumulated damage from wear and tear (electromigration) can also cause this error. The true percentage of consoles with BGA defects that can be fixed with a reball/reflow is unknown. However, there is evidence to suggest that the underfill used to reinforce the CPU/GPU die and RSX Ram bumps was not as effective when the PS3 was manufactured. This could explain many of the consoles who's reball fails prematurely afterwards.
If a reflow/reball of both the CPU/GPU fails, then the chip is beyond repair and needs replaced. The RSX can be replaced with the same model without modification. It can be replaced with a different model using a modchip that injects the correct RSX ID during boot. This has been nicknamed a "Frankenstein Mod." Since they are married to each other, the CPU can only be replaced if also replacing the chipset (NAND/NOR and SYSCON Chips). Since the CPU can't as easily be replaced, a dead CPU is usually considered unrepairable.
3035
3036
3037
3038
3039
3040
Flash
Data Errors
- This error codes seems to be repeated up to 5 times for 5 special cases, as example, errors 4001, 4101, 4201, 4301, 4401 are related to CELL, the only thing that changes in the error code is the second digit (located inmediatly after the category). If at some point we find what means that digit we can join the wiki page sections together (with titles: "4001, 4101, 4201, 4301, 4401", etc...)
4001
4002
4003
Southbridge
4011
4101
4102
4103
Southbridge
4111
4201
4202
4203
Southbridge
4211
4212
4221
4222
4231
4261
4301
4302
4303
Southbridge
4311
4312
4321
4322
4332
4341
4401
4402
4403
4411
4412
4421
4422
4432
4441
|