Messageboard
put your user to user message in this section :)
Dear Ada,
Traitor!
the end.
I'll be back! in few weeks months.--Ada L0ve Lace (talk) 10:32, 26 February 2015 (EST)
22 March 2015 Barcelona vs Real Madrid
Notes:
- Matyrant, Seussarez, Adanaldo scored (and get false positive offside on his assist), Meussi just no.
Real notes:
Meussi did the assist on the 1st goal and Meussi is the leader.
Meussi 1-0 Adanaldo
cya next time for another clasico!
Ctyriano Adanaldo 36
Meussi 32
i saw it live today 9-1
- you went to Madrid? to watch Adanaldo? if so, you are traitor and became Adanaldo fan
Notebook
ToDo
Decap
Epoxy resin around the chip could be removed using fuming nitric acid. Hot fuming nitric acid dissolves the package without affecting the chip. The procedure should preferably be carried out under very dry conditions, as the presence of water could corrode exposed aluminium interconnects. The chip is then washed with acetone in an ultrasonic bath, followed optionally by a short bath in deionized water and isopropanol. After that chip could be glued into a test package and bonded manually. Having enough experience it might be possible to remove epoxy without destroying bonding wires and smartcard contacts.
On the depackaged chip, the top-layer aluminium interconnect lines are still covered by a passivation layer (usually silicon oxide or nitride), which protects the chip from the environment and ion migration. On top of this, we might also find a polyimide layer that was not entirely removed by HNO3 but which can be dissolved with ethylendiamine. We have to remove the passivation layer before the probes can establish contact. The most convenient depassivation technique is the use of a laser cutter. The UV or green laser is mounted on the camera port of the microscope and fires laser pulses through the microscope onto rectangular areas of the chip with micrometer precision. Carefully dosed laser flashes remove patches of the passivation layer. The resulting hole in the passivation layer can be made so small that only a single bus line is exposed. This prevents accidental contacts with neighboring lines and the hole also stabilizes the position of the probe and makes it less sensitive to vibrations and temperature changes.
- General
|
This user lives in Japan.
|
|
This user provides wiki help.
|
|
This user document's for the PS4.
|
IRC
|
This user can be found on IRC efnet #ps4dev
|
|
This user owns 1.5 PS3 Fat's.
|
|
This user owns 1 PS3 Slim.
|
|
This user owns 1 PS2 .
|
|
This user owns 128 MB PS2 MemoryCard's.
|
|
This user owns 2 PS1's.
|
|
This user owns 1,05 PS1 Controller's.
|
|
This user owns 2 PS1 DualShock's.
|
|
This user owns few 8 MB PS1 MemoryCard's.
|
|
This user owns 1 PSP.
|
|
This user owns 4 and 8 GB Memory Stick's.
|
|
This user owns severall PS3 Bluray Game's.
|
|
This user owns few DVD Movie's.
|
|
This user owns few Super Audio CD.
|
|
This user owns severall PS1 CD Game's.
|
|
This user is running System Menu 4.1 on their Wii.
|
|
This user has installed the Homebrew Channel version 1.0.6 on their Wii (U).
|
|
This user has installed BootMii on their Wii.
|
|
This user uses MPlayer CE to play media on their Wii.
|
|
This user uses WiiMC to play media on their Wii.
|
|
This user owns 1 Wii Remote.
|
|
This user owns 1 Nunchuk.
|
|
This user owns 1 GameCube Controller.
|
|
This user believes in freedom of all types of information for all.
|
|