Syscon Error Codes: Difference between revisions

Revision as of 12:05, 6 November 2021

The error codes follows the format: ARSSCEEE, where:

A (Fixed)
- A = unknown
R (Reserved)
- 0-E = Unknown
- F = Frequent error
SS (Step)
- 00-7F = Step of the power on sequence where the error happened
- 80 = The error happened when the PS3 was powered on
- 90 = The error happened when the PS3 was powered off
- A0 = The error happened after a syscon reset
C (Category)
- 1 = System
- 2 = Fatal
- 3 = Boot
- 4 = Data
EEE (Error)
- Any number in hex

The list below only includes the last 4 numbers (category + error)

Cell Vram Power

RSX Vram Power

PSU Power

Thermal

Cell thermal

RSX thermal

Cell voltage regulators thermal

Southbridge thermal

EE/GS thermal

Cell PLL

Check stop

Cell livelock

Cell attention

RSX init

RTC voltage

RTC oscilator

RTC access

@@ Line 34: / Line 34: @@
 PSU Power
-==== XXXX ====
+==== 1103 ====
+Thermal
-==== XXXX ====
+==== 1200 ====
+Cell thermal
-==== XXXX ====
+==== 1201 ====
+RSX thermal
-==== XXXX ====
+==== 1203 ====
+Cell voltage regulators thermal
-==== XXXX ====
+==== 1204 ====
+Southbridge thermal
-==== XXXX ====
+==== 1205 ====
+EE/GS thermal
-==== XXXX ====
+==== 1301 ====
+Cell PLL
-==== XXXX ====
+==== 14FF ====
+Check stop
-==== XXXX ====
+==== 1601 ====
+Cell livelock
-==== XXXX ====
+==== 1701 ====
+Cell attention
-==== XXXX ====
+==== 1802 ====
+RSX init
-==== XXXX ====
+==== 1900 ====
+RTC voltage
-==== XXXX ====
+==== 1901 ====
+RTC oscilator
-==== XXXX ====
+==== 1902 ====
+RTC access
 === Fatal ===