CSW-001
Jump to navigation
Jump to search
This article is marked for rewrite/restructuring in proper wiki format. You can help PS3 Developer wiki by editing it. |
Part number: 1-871-871-21
Panel for PS3 models FAT CECHA, B, C, E
Pin | Name | Connected to | Description | |
---|---|---|---|---|
On Motherboard | On Switch board | |||
1 | GND | GND | GND | Ground |
2 | SW_PWM | Syscon pad N9 | Testpad ? | FREQ. Intended to send a PWM signal to the switch board ? |
3 | RMC_IN | Syscon pad R10 Service Connector (CN4009) pin 17 |
Testpad ?. NC | ReMote Control INput The IR receiver component is missing in the Switch board but existed in some PS3 prototypes that was using SIRC protocol and SERV_SIRCS |
4 | POW_SW | Syscon pad B12 | Power Switch | |
5 | EJECT_SW | Syscon pad A12 | Eject Switch | |
6 | POW_LED | Syscon pad M7 | Green led | |
7 | STBY_LED | Syscon pad N7 | Red led | |
8 | BD_LED | BluRay connector (CN3221) pin 50 | Blue led | |
9 | GND | GND | GND | Ground |
10 | +5V_EVER | Power Supply connector (CN6005) pins 4 and 5 | VCC | 5V Standby |
|