Downgrading with Hardware flasher

From PS3 Developer wiki
Revision as of 02:24, 16 February 2012 by Jhax78 (talk | contribs) (→‎NAND)
Jump to navigation Jump to search

Dump

Connect your Hardware flashing device and make sure you are getting 100% correct, valid, verified dumps.

Checking console capability of running 3.55

Compare the values found in your dump with those in the table below

metldr+bootldr sizes

You can check metldr and bootldr sizes easily with HxD

  • either after extracting flash with Flowrebuilder and opening seperate files
  • or by looking in the unextracted Flash dump at the correct offset.

This table lists some common known values for your convenience as quick lookup:

IDPS/Product Code SKU - Datecode / Manufacturing date metldr offset bootldr Notes lowest
known
firmware
0x2F077 (NOR)
0x80877 (NAND)		 0x81E (NOR)
0x4081E (NAND)		 0x842 (NOR)
0x40842 (NAND)		 size 0xFC0002 (NOR)
0x02 (NAND)		 0xFC0012 (NOR)
0x12 (NAND)
n/a CEB-2030 (MPU-501)  PROTO  n/a n/a 28C20 28 BE 28 BE Patch + FSM = OK <=0.50.003
01 DEH-Z1010 (TMU-520)  SD  14 20 11 3E 2D020 2C FE 2C FE Patch + FSM = OK <=0.80.004
01 DECR-1000 (TMU-520)  DECR  Every DECR manufactured before January 2009 Share the same BL/Metldr revisions EC 40 0E C0 2A840 2A 80 2A 80 Patch + FSM = OK <=0.85.010
01 ?DEH-H1001-D? (COOKIE13)  CEX  EC 40 0E C0 2A830 2A 7F 2A 7F Patch + FSM = OK <=0.85.010
01 DEH-H1000A-E (COK-001)  DEX  EC 70 0E C3 2A1E0 2A 1A 2A 1A Patch + FSM = OK <095.001
01
04		 CECHAxx (COK-001)
CECHExx (COK-002)		 EE 10 0E DD 2A430 2A 3F 2A 3F Patch + FSM = OK 1.00
1.00
01
02
03
01		 CECHAxx (COK-001) with 1.00 from factory
CECHBxx (COK-001)
CECHCxx (COK-002)
DECHAxx (COK-001)  DEX 		 ED A0 0E D6 2A2E0 2A 2A 2A 2A Patch + FSM = OK 1.00
1.00
1.00
1.00
03 CECHCxx (COK-002) with 1.00 from factory EB F0 0E BB 30480 30 44 30 44 Patch + FSM = OK 1.00
1.00
01
02
03		 CECHAxx (COK-001)
CECHBxx (COK-001)
CECHCxx (COK-002)		 ED E0 0E DA 2A3B0 2A 37 2A 37 Patch + FSM = OK 1.00
1.00
1.00
04
05		 Namco System 357 (COK-002)  ARC 
CECHGxx (SEM-001)		 E7 B0 0E 77 2E900 2E 8C 2E 8C Patch + FSM = OK ?1.90?
1.90
05
06		 CECHGxx (SEM-001)
CECHHxx (DIA-001)		 E7 B0 0E 77 2F200 2F 1C 2F 1C Patch + FSM = OK 2.30
2.30
05
06		 CECHGxx (SEM-001)
CECHHxx (DIA-001)		 E8 C0 0E 88 2EF80 2E F4 2E F4 Patch + FSM = OK 2.30
2.30
06
07		 CECHHxx (DIA-001)
CECHJxx (DIA-002) with 2.30 from factory - datecode 8B		 E8 E0 0E 8A 2EF80 2E F4 2E F4 Patch + FSM = OK 1.97
2.30
03
06
06		 CECHExx (COK-002)
CECHHxx (DIA-001)
CECHMxx (DIA-001)		 EA 60 0E A2 2EE70 2E E3 2E E3 Patch + FSM = OK
1.97
1.97
07 CECHJxx (DIA-002)
CECHKxx (DIA-002) datecode 8C		 EA 60 0E A2 2EE70 2E E3 2E E3 Patch + FSM = OK
2.30
08
07
08		 Namco System 357 (VER-001)  ARC 
DECHJxx (DIA-002)  DEX 
CECHLxx / CECHPxx (VER-001)		 E8 D0 0E 89 2EAF0 2E AB 2E AB Patch + FSM = OK ?2.45?
2.16
2.45
08 CECHLxx (VER-001) E8 D0 0E 89 2EB70 2E B3 2E B3 Patch + FSM = OK 2.45
08
09		 CECHLxx (VER-001) with 2.30 from factory - datecode unknown
CECH-20xx (DYN-001) with 2.76 from factory, datecode unknown		 E8 90 0E 85 2F170 2F 13 2F 13 Patch + FSM = OK 2.30
2.70
09 DECR-1400 (DEB-001)  DECR  with 2.60 from factory - manufacture date June 09
 E8 90 0E 85 2F170 2F 13 2F 13 Patch + FSM = OK 2.60
09 CECH-20xx (DYN-001) E9 20 0E 8E 2F3F0 2F 3B 2F 3B Patch + FSM = OK 2.70
0A CECH-21xx (SUR-001) E9 20 0E 8E 2F4F0 2F 4B 2F 4B Patch + FSM = OK 3.20
03
0B
0B		 CECHExx (COK-002W) refurbished
CECH-25xx (JTP-001) with 3.40 from factory - datecode 0C
CECH-25xx (JSD-001) with 3.41 from factory - datecode 0C		 E9 20 0E 8E 2F4F0 2F 4B 2F 4B Patch + FSM = OK 3.40
3.40
3.40
0B
0B		 CECH-25xx (JSD-001) with 3.56 from factory - datecode 0D
CECH-25xx (JTP-001) with 3.56 from factory - datecode 1A		 E9 60 0E 92 2F570 2F 53 2F 53 Patch + FSM = OK 3.50
3.50
0B
0B
0B
 CECH-25xx (JTP-001) with 3.56 from factory - datecode 1A (rare)
CECH-25xx (JSD-001) with 3.56 from factory - datecode 1B (common)
CECH-25xx (JTP-001) with 3.56 from factory - datecode 1B (common)		 E9 60 0E 92 2F5F0 2F 5B 2F 5B (RLOD+)poweroff @ downgrade 355
(3.56+ + spkg fix + signed 3.55 priv : should work)
Patch + noFSM = OK		 3.56
3.56
3.56
0B
0B
0C		 CECH-25xx (JSD-001) with 3.60 from factory - datecode 1B
CECH-25xx (JTP-001) with 3.60 from factory - datecode [N.A.]
CECH-30xx (KTE-001) with 3.65 from factory - datecode [N.A.]		 F9 20 0F 8E 2FFF0 2F FB 2F FB "metldr.2"
(RLOD+)poweroff @ downgrade 3.55
(RLOD+)poweroff @ Patch + noFSM		 3.60
3.60
3.60
0C CECH-30xx (KTE-001) with ? from factory - datecode [?] F9 B0 0F 97 30070 30 03 30 03 "metldr.2"
(RLOD+)poweroff @ downgrade 3.55
(RLOD+)poweroff @ Patch + noFSM		 ?
0C CECH-30xx (KTE-001) with 3.72 from factory - datecode [1C] F9 B0 0F 97 300F0 30 0B 30 0B "metldr.2"
(RLOD+)poweroff @ downgrade 3.55
(RLOD+)poweroff @ Patch + noFSM		 3.72
0D
0D
2C		 CECH-40xx (MSX-001)
CECH-40xx (MPX-001)
CECH-40xx (MSX-001) '12GB'		 F9 B0 0F 97 301F0 30 1B 30 1B "metldr.2"
(RLOD+)poweroff @ downgrade 3.55
(RLOD+)poweroff @ Patch + noFSM		 4.20
?
4.22
12 CECH-42xx (PQX-001) '12GB' F9 B0 0F 97 301F0 30 1B 30 1B "metldr.2"
(RLOD+)poweroff @ downgrade 3.55
(RLOD+)poweroff @ Patch + noFSM		 4.20
?
4.22

Patch the dump & Reflash it to the console

You can use Hexeditor for patching (e.g. HxD).

NAND

Use NAND patches only on NAND consoles, not on NOR!

Target area Patchfile NAND Offset Paste length Remarks
ROS0 patch1 (7 MB) 0x0C0030 0x6FFFE0 CoreOS (prepatched 3.55)
ROS1 patch1 (7 MB) 0x7C0020 0x6FFFE0 CoreOS (SAME as ros0)
trvk_prg0 (0x91800)
trvk_prg1 (0x92810)
trvk_pkg (0x93800)		 patch2 (16 KB) 0x91800 0x4000 one big patch overlapping several revoke area's

NOR

Use NOR patches only on NOR consoles, not on NAND!

http://www.mirrorcreator.com/files/ZAU6Y65L/NOR-downgradepatches.rar_links

Target area Patchfile NOR Offset Paste length Remarks
ROS0 patch1 (7 MB) 0x0C0010 0x6FFFE0 CoreOS (prepatched 3.55)
ROS1 patch1 (7 MB) 0x7C0010 0x6FFFE0 CoreOS (SAME as ros0)
trvk_prg0 (0x40000)
trvk_prg1 (0x60000)
trvk_pkg0 (0x80000)
trvk_pkg1 (0xA0000)		 rvk-040000 (512 KB) 0x40000 0x80000 one big patch
overlapping several revoke area's

Reinstall firmware in Factory Service Mode

  1. Use the PSGrade dongle to trigger Factory Service Mode (in the rightmost USB port).
  2. Turn PS3 on, it will trigger Factory Service Mode and turn off the console.
  3. After triggering Factory Service Mode, put the Lv2diag.self (see below) and prepatched firmware to install (named PS3UPDAT.PUP) in root of your USB Mass Storage Device and plug it in the PS3 (again, in the rightmost USB port).
  4. Turn PS3 on, it will install the firmware you had put there (even though you have no screenoutput, you can see it is busy by looking at the activity led of the harddrive and of your USB Mass Storage Device).
  5. PS3 will turn itself off after finishing the firmware installation.

See also Downgrading with PSgrade Dongle, which also contains alot of ready to use PSgrade HEX files for several dongles.

PUP to use

Rogero V2 or any firmware with prepatched lv1 (no syscon hash checks)

Different Factory Service Mode SELFs

NAND

For factory Service Mode install:

  • if using the normal lv2diag : Use a NoBD patched PUP (e.g. Rogero NoBD PUP) (to prevent error 0x8002f057)
  • if using the jaicrab NoBD lv2diag : Use the Rogero normal PUP (and redump flash after FSM to check both ROS)

NOR

Use the normal lv2diag and use the Rogero normal PUP

Only when having a console with a broken bluraydrive, you either:

  • use the normal lv2diag : Use a NoBD patched PUP (e.g. Rogero NoBD PUP) (to prevent error 0x8002f057)
  • use the jaicrab NoBD lv2diag : Use the Rogero normal PUP
Filename Size Remarks SHA1 MD5 CRC32 CRC16
Lv2diag.self (227.38 KB) 232832 jaicrab noBD patched 180823003B086D9D49BC7F83BEA9C769BF73A5EA 3615770407C0C3FA00D8CA49C8ADB362 25E85CFB EDD0
Lv2diag.self (365.5 KB) 374272 3.55 get in FSM 1ED037740D67FEBACA6449CABFF4E95400C9E2EE 099F33A7967F99E91C07E870FD78B3DB 9338ABF2 4FCC

Check the logfile

After installation of the firmware, take the created logfile in root of USB Mass Storage Device and look if it contains errors (pastie the log if you want to ask for help online on IRC)

Getting out of Factory Service Mode

If everything went fine without errors, you can take the console out of service mode and enjoy your downgraded console :)

  1. Put the Lv2diag.self (see below) in root of your USB Mass Storage Device and plug it in the PS3 (again, in the rightmost USB port).
  2. Turn PS3 on, it will trigger Factory Service Mode off and shutdown.
Filename Size Remarks SHA1 MD5 CRC32 CRC16
Lv2diag.self (201.42 KB) 206256 get out FSM 329877CBD47B994EC0AFCEA6AF98114FD9E5128B 7A20BFDAE65EEFB47A4425DB1B52DCDE 72740080 502A
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Downgrading_with_Hardware_flasher&oldid=10197"