CSW-001

From PS3 Developer wiki
Revision as of 02:28, 20 July 2017 by Sandungas (talk | contribs) (trying to standarize switch board pages sections)
Jump to navigation Jump to search

Description

Pinout

CSW-001 Pinout
Pin Name Connected to Description
On Motherboard On Switch board
1 GND GND GND Ground
2 SW_PWM Syscon pad N9 Testpad ? FREQ. Intended to send a PWM signal to the switch board ?
3 RMC_IN Syscon pad R10
Service Connector (CN4009) pin 17
Testpad ?. NC ReMote Control INput
The IR receiver component is missing in the Switch board but existed in some PS3 prototypes that was using SIRC protocol and SERV_SIRCS
4 POW_SW Syscon pad B12 Power Switch PS3 power button
5 EJECT_SW Syscon pad A12 Eject Switch PS3 eject button
6 POW_LED Syscon pad M7 Green led
7 STBY_LED Syscon pad N7 Red led
8 BD_LED BluRay connector (CN3221) pin 50 Blue led
9 GND GND GND Ground
10 +5V_EVER Power Supply connector (CN6005) pins 4 and 5 VCC 5V Standby
  • Eject LED should be connected to BD controller CXD5063AGG-1
  • Other signal pins should be connected to syscon CXR713120-xxx series

How it works

Modding