KSW-001
Contents
Description[edit]
- Part number: 1-884-751-31
- KSW-001 is a switch board compatible with PS3 models:
- Notes:
- Compatibility with other ps3 models - Can rewire a DSW-001 by matching pins to make it work with out back white, hidden, eject led, and 10th gnd pin on a 300X model full power eject and red and green led functions, A KSW-001 Will not work on a 200X model (dsw-001 slot) not tested on other models.
Switch board KSW-001 (top view)
Switch board KSW-001 (PCB top view)
Switch board KSW-001 (PCB with ribbon cable, bottom view)
Switch board KSW-001 (PCB bottom view)
KSW-001 pin out diagram
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
Pinout[edit]
| Pin | Signal/Connected to | Description | |
|---|---|---|---|
| On Motherboard | On Switch board | ||
| 1 | Syscon SW3-30x, pin ? | EJECT switch | Sink to ground to activate |
| 2 | VCC | VCC | +5V DC VCC |
| 3 | Syscon SW3-30x, pin ? | POWER switch | Sink to ground to activate |
| 4 | Syscon SW3-30x, pin ? | RED led | Connects to right-top corner pin (red gnd) of dual red/green LED over power switch, |
| 5 | Syscon SW3-30x, pin ? | GREEN led | Connects to top right corner pin (green gnd) of dual red/green LED over power switch, |
| 6 | GND | GND | Ground |
- above top panel view port behind pcb. resistors was not tested.
How it works[edit]
Modding[edit]
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
