DECR-1000
Jump to navigation
Jump to search
DECR-1000(A/J)
Specifications
SubModels | DECR-1000A / DECR-1000J |
---|---|
Type | 0x01 |
Motherboard | TMU-520 |
Flash Storage | 2x 256MB NAND |
CELL BE / RSX | 90nm / 90nm |
South Bridge | CXD2973AGB-4 |
Syscon | CXR713F120A |
CP | CXD9790GG TCP-520 |
BDemu Harddrive | 400GB |
GameOS Harddrive | 400GB |
Bluray Drive | YES |
HDMI Ports | 2 |
OtherOS | PARTIAL (Only from System Firmware 0.90 to 0.96, not available in other firmwares) |
USB Ports | 6 |
GbLAN Ports | 4 (1 for debugger) |
Serial Ports | 1 (Hidden next to LAN(DEV) lan port, used in SYSCON emergency updates) |
Flash Readers | Yes |
PS2 mode | NO (No Emotion Engine or Graphic Synthesizer on the motherboard, no ps2emu software in the official firmware) |
PS1 mode | NO (No ps1emu software in the official firmware) |
SA-CD | NO (The Bluray Drive is compatible but no software exists to play the discs in Official Reference Tool firmwares) |
WiFi802.11b/g | YES |
SKU Release date | 2006 |
SDK / Firmware support | =>1.0.0 or =>2.3.0 (Since Jan 2009) |
downgradeable Min. praxis | 0.85.009 |
Other | contains prototype components, hardware is much closer to DEH-R1040 than CECHAxx. |
Power Supply | nichihon ZSSR541iB
|
Boards
Motherboard
TMU-520 1-871-645-11, 1-871-645-12, 1-871-645-13 - Mainboard
SubBoards
BMD-001 1-871-575-11 - Blu-ray drive controller board TAM-520 1-871-636-11 - Analog 4-ch. audio output TAV-520 1-871-635-11 - Analog AV out TBP-520 1-871-644-11 - Backplane for 2x SATA HDD + BD TCP-520 1-871-646-11 - Communication Processor board TEJ-520 1-871-641-11 - HDD Activity/Eject board TFL-520 1-871-638-11 - Front Panel LEDboard (GPI/GPO/Reset/Start...) TFP-520 1-871-640-11 - Front Panel Switchboard (GPI/GPO/Reset/Start...) TMR-520 1-871-647-11 - CP-helper board TMW-520 0-347-825-02 - Bt/Wifi board TSA-520 1-871-639-11 - BD PATA->SATA adapter TUU-520 1-871-643-11 - Front I/O (Foot-Sw/USB/CardReader)
Pictures
DECR1000A - frontleft
DECR1000A - front
DECR1000A - topback
DECR1000A - controller top
DECR1000A - controller back
DECR1000A - back
DECR1000A - back label
DECR1000A - bottom
DECR1000A - front
DECR1000A - front0
DECR1000A - front1
DECR1000A - front2
DECR1000A - front3
DECR1000A - front4
DECR1000A - bottomlabel powerrating
DECR-1000A - Nichicon ZSSR541iB 1-474-032-21 Power Supply labeling
Links
Overview and the detailed explaination in French
Pictures of the DECR-1000A boards
Instruction Manual
https://fccid.io/AK8DEHR1000
https://fccid.io/pdf.php?id=686154
Comparison
Model | Type | Board | Flash | SB | Syscon | CP | BDemu HDD | GameOS HDD | Bluray Drive | HDMI Ports | OtherOS | CELL BE | RSX | USB Ports |
GbLan Ports |
Flash Readers |
Support: PSP PS2 PS1 |
SA- CD |
WiFi 802.11 b/g |
SKU Release date |
SDK/FW support |
downgradeable Min. praxis |
Other |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DECR-1000(A/J) | 0x01 | TMU-520 | 2x 256MB NAND | CXD2973AGB-4 | CXR713F120A | TCP-520 | 400GB | 400GB | ?0x00? | 2 (NO CEC) | NO | 90nm | 90nm | 4 + 2 extra | 4 (1 for dbg.) | YES | ?YES? NO NO |
NO | YES | 2006 | =>1.0.0 or =>2.3.0 (since 1/2009) |
0.08 | contains prototype components, hardware is identical to DEH-R1040 with a different label/model name. |
DECR-1400A/J | 0x09 | DEB-001 | 1x 16MB NOR | CXD2984AGB | CXR714120-302GB | (via SB) | - | 160 GB | ?0x0A? | 1 (NO CEC) | PARTIAL | 45nm | 65nm | 4 | 2 (1 for dbg.) | NO | ?YES? NO NO |
NO | YES | 6/2009 | =>2.6.0 | =>2.60 | same case as retail PS3 |
Differences between the 1000 and 1400:
- DECR-1000:
- Gb-DEVLAN is connected to the Communication Processor
- With a pre (or equal to) 0.85.010 bootrom you do have two HDMI outputs.
- Not all DECR-1000 are equal! Despite Sony's documentation claiming otherwise, DECR-1000 units with RSX rom version b07 and above such as refurbished/serviced units (and perhaps some others that have not been encounter) are not capable of running any firmware lower than 1.60 (from sdk 160.008) this is because the rom version is unknown/unsupported in older lv1 which will fail to initialize the RSX hardware and will cause lv1 to output a "rsx rom abort!" message, this will in turn create an exception early in lv2 boot process as it tries to use the RSX and creates a hard brick several RSX related errors such as "lv2(2): # __rsxaudio_intr_create_thread 983 ffffffff" or "graphics error 512 : 00012625 c221bbb0" ; "lv2(2): page fault handler (DSI): invalid access address 0x795d00e8!".
- DECR-1400:
- You cannot use Performance monitoring functions (libperf, libprof, tuner for PS3)
- for SPU: PC sampling, Performance counters, Bookmark, RAW SPU support
- for RSX: Signal Trace, User Events.
- DECI3 is limited to one protocol and a data exchange size of 65535 bytes.
- The two GbLAN´s share the same MAC ID and cannot be used in the same network segment.
- Gb-DEVLAN is connected to South Bridge.
- You cannot use Performance monitoring functions (libperf, libprof, tuner for PS3)
|