RTX-00x: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
= RTX-001 = | = RTX-001 = | ||
Has a 40-pin connector for the laser flat flex cable, just like [[REX-001]]. | Has a 40-pin connector for the laser flat flex cable, just like [[REX-001]]. | ||
RTX-001 (as well as [[REX-001]]) require heatsinking for Cell's VRM MOSFETs. For this purpose, the metal shields are shaped differently and thermal pads are applied on both, top and bottom, of the PCB at the mosfets. This is needed because these boards use less PCB layers and thus don't have a large enough copper plane in the PCB to sink the heat into. | |||
== Specifications == | == Specifications == | ||
{|class="wikitable" | {|class="wikitable" | ||
Revision as of 08:21, 10 February 2023
RTX-001
Has a 40-pin connector for the laser flat flex cable, just like REX-001.
RTX-001 (as well as REX-001) require heatsinking for Cell's VRM MOSFETs. For this purpose, the metal shields are shaped differently and thermal pads are applied on both, top and bottom, of the PCB at the mosfets. This is needed because these boards use less PCB layers and thus don't have a large enough copper plane in the PCB to sink the heat into.
Specifications
| Models | CECH-43xxA / CECH-43xxB / CECH-43xxC |
|---|---|
| Part no. / revisions | 1-893-504-11 / -31 |
| Regions | |
| Backwards Compatibility | PS1 Only. No PS2 |
| Flash Storage | |
| Cell/RSX | 45nm/28nm |
| Watts/Max | 80/210 |
| Release |
Pictures
RTX-001 NOR top side
RTX-001 NOR bottom side
RTX-001 eMMC top side
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
